- Joined
- Aug 16, 2012
- Messages
- 15
- Reaction score
- 0
1. In Server files go to the folder "map" and select the map folder you want to change in my case I chose the folder "Medicallabe".
2. Create a copy of the file that has the extension ".spt" and rename adding only EXT as shown below:
• Before: Medicallabe – copy .spt
• After: MedicallabeEXT.spt
3. Open the file with an editor (I recommend Notepad ++) and delete all content and replace with the following dummy:
;helper´Â ÇöÀç ´ÙÁßÆ÷±×,À½¾Ç¿µ¿ªÀ¸•Î »ç¿ëµÈ´Ù..
script_begin
*Cora_dummy01 -406 -406 -406 406 406 406
-music
-id 8
-node_tm
0.999985 0.000000 -0.005473 0.000000
0.000000 1.000000 0.000000 0.000000
0.005473 0.000000 0.999985 0.000000
245.332642 1124.354004 -8603.969727 1.000000
script_end
4. Then you will have to make the following changes:
• change the name "Cora" by the map name you want, in my case was as follows “Medicallabe_dummy01 -406 -406 -406 406 406 406”.
• In exchange for blue coordinates where you want the safe-zone.
5. Recalling that the coordinated should have 6 digits zeros after the point.
• Wrong =245.124356 1124. 124356 -8603. 124356;
• Correct =245.000000 1124.000000 -8603.000000
Informações:
Red: Map name for safe-zone.
Green: Ranger sefe-zone
Blue: Coordinates for sefe-zone
I hope you enjoy this little tutorial!
2. Create a copy of the file that has the extension ".spt" and rename adding only EXT as shown below:
• Before: Medicallabe – copy .spt
• After: MedicallabeEXT.spt
3. Open the file with an editor (I recommend Notepad ++) and delete all content and replace with the following dummy:
;helper´Â ÇöÀç ´ÙÁßÆ÷±×,À½¾Ç¿µ¿ªÀ¸•Î »ç¿ëµÈ´Ù..
script_begin
*Cora_dummy01 -406 -406 -406 406 406 406
-music
-id 8
-node_tm
0.999985 0.000000 -0.005473 0.000000
0.000000 1.000000 0.000000 0.000000
0.005473 0.000000 0.999985 0.000000
245.332642 1124.354004 -8603.969727 1.000000
script_end
4. Then you will have to make the following changes:
• change the name "Cora" by the map name you want, in my case was as follows “Medicallabe_dummy01 -406 -406 -406 406 406 406”.
• In exchange for blue coordinates where you want the safe-zone.
5. Recalling that the coordinated should have 6 digits zeros after the point.
• Wrong =245.124356 1124. 124356 -8603. 124356;
• Correct =245.000000 1124.000000 -8603.000000
Informações:
Red: Map name for safe-zone.
Green: Ranger sefe-zone
Blue: Coordinates for sefe-zone
I hope you enjoy this little tutorial!
Last edited: