[SHARE]Good Stable Centos Bridged Connection

[Lazy]

Like the title says...

First of all you must disable the vmnet adapters like Mahi did in the video.
Also i just figered this out becouse i had trouble if i turned centos off and next day back on, i could not connect to it anymore, So i could not connect to my server anymore, thats why i thought maybe other ppl have same problem so why not share whit you guys?:wink2:

Step 1:

Go to you vmware Click "Edit" -> "Virtual Network Settings"

Step 2:

Click "Automatic Bridging" then Click on Add and add your network card
(which your network cable is connected to..)

Step 3:

Click "Host Virtual Network Mapping" Click at a VMNet which got "Not Bridged" (i do & take the 9 one) select your network adapter you just added

Step 4:

Click "Ok" then go whit your mouse, right below the wmware screen, Right click Ethernet "Click Edit" Select Custom and the VMNet Nr you specified
for example like i did VMNet9

Start centos and hf, Credit to Lazy

Ok, nothing to say more
just dont copy into other and say "i found" Leave "Credit to Lazy"

if i helped just press Thanks

Mvg Lazy

 

[chiishame]

me too! its just how to setup your network properly in your VM centos and your network! mine has a working bridge between Vm network adaptors and my network it just working perfectly!

 

[chumpywumpy]

Not necessary at all. The only reason you couldn't connect to centos after rebooting it would be because it picked up a different ip via dhcp and all you need to do is make it staric. I use standard bridging and have never had problems.

 

[cutie123]

there should be a thanks button for this.. didnt set mine to dhcp.. but for some reason it detected the wrong network adapter.. ive 3 network cards so >.<

 

[Shmuga66]

i did all that but i dont know what ip to put in the edit of eth0 and gateway and primary dns...

 

[Lazy]

i did all that but i dont know what ip to put in the edit of eth0 and gateway and primary dns...

IP = ip of your centos
DNS, you can find a Status of Lan-Connection "nr" (default = 255.255.255.0)
Gateway, Also located there

Mvg Lazy

 

[Smiagol1000]

where i can find this status lan conection...i cant find him on my pc...:/

 

[Lazy]

there should be a thanks button for this.. didnt set mine to dhcp.. but for some reason it detected the wrong network adapter.. ive 3 network cards so >.<

Set it to your primary should work or try disable 1 of your cards you dont use or both depends on your netwrk setup

i did all that but i dont know what ip to put in the edit of eth0 and gateway and primary dns...

where i can find this status lan conection...i cant find him on my pc...:/

Well, i posted a screenshot, just dont reply "why is it dutch?"
its just to help but you'l see howto go there

Mvg Lazy