- Joined
- Sep 26, 2008
- Messages
- 4
- Reaction score
- 0
1.Click Start on bottom left of your screen
2.Click on "Control Panel" and click on "Classic View"
3.Now at the top left coner there is "Add Hardware" click into it
4.It should have a "Add Hardare Wizard"
5.Now click "Next" press on "Install the hardware that i manually select from a list (Advanced)
6.Now scroll down till you find "Network Adapters" press on it and click "Next"
7.Wait for 3seconds and a list should appear. On the Manufactuer list scroll down till you find "Microsoft"
8. Once you click on "Micosoft" on the other side "Network Adapter:" scroll down and find "Loopback Adapter" and click on "Next"
9.Now you will need to install Loopback Adapter. Click "Next" and install
10. After you install Loopback Adapter goto "Network and Sharing Center" and find Loopback Adapter if it doesnt show Loopback Adapter your Unidentified Network" is your loopback adapter
11.Now click on "Manage network connections"
12. There should be "Local Area Connection 2" that is Loopback Adapter. Now right click on it and go to "Properties"
13.Click on "Internet Protocol Version 4 (TCP/IPv4)" and press "Properties"
14.Click on "Use the following IP adress:". Enter your WAN IP (which can be found
2.Click on "Control Panel" and click on "Classic View"
3.Now at the top left coner there is "Add Hardware" click into it
4.It should have a "Add Hardare Wizard"
5.Now click "Next" press on "Install the hardware that i manually select from a list (Advanced)
6.Now scroll down till you find "Network Adapters" press on it and click "Next"
7.Wait for 3seconds and a list should appear. On the Manufactuer list scroll down till you find "Microsoft"
8. Once you click on "Micosoft" on the other side "Network Adapter:" scroll down and find "Loopback Adapter" and click on "Next"
9.Now you will need to install Loopback Adapter. Click "Next" and install
10. After you install Loopback Adapter goto "Network and Sharing Center" and find Loopback Adapter if it doesnt show Loopback Adapter your Unidentified Network" is your loopback adapter
11.Now click on "Manage network connections"
12. There should be "Local Area Connection 2" that is Loopback Adapter. Now right click on it and go to "Properties"
13.Click on "Internet Protocol Version 4 (TCP/IPv4)" and press "Properties"
14.Click on "Use the following IP adress:". Enter your WAN IP (which can be found
To view the content, you need to sign in or register
