- Joined
- Feb 2, 2011
- Messages
- 474
- Reaction score
- 591
Guide:
To view the content, you need to sign in or register
Server part
Code:
1.Installation [VMware Workstation 7.1.5 build-491717] or later . Of course, if no special needs , you can also install any high version [VMware Player] ( only open and use the virtual mirror function, can not be modified and more advanced operations . )
Code:
2. Unzip [1051 6G.7z] archive to any directory.
Code:
3. Open the [VMware Workstation] or [VMware Player], and through the program to open the [1051 6G.7z] extract obtained within the folder [1051.vmx]
Code:
4. Double-click the right side of the [ device ] box body [ memory ] project , pop [ Virtual Machine Settings ] frame .
Code:
5. According to the amount of physical memory on [ the virtual machine memory ] project settings:
Windows XP and 2003
Physical 2G or more, provided with at least 1024MB
Physical 4G or more, provided with at least 2048MB
Physical 6G above , provided at least 2048MB or higher
Windows 7
Physical 4G or more, provided with at least 2048MB
Physical 6G above , provided at least 2048MB or higher
After setting, [ OK ] to exit.
Code:
6. Left-click [ Open the virtual machine power ] , start the virtual machine [Windows 2003 X64 SP2] system , and wait for full access .
Code:
7. In the lower right corner of the virtual system , double-click [ Local Area Connection ] icon and click [ support ] , you can view the [IP address ] , and write down the address for later use , close the [ Local Area Connection Status ] frame . ( Early View after avoided because the server startup caused by Caton , affect efficiency )
Code:
8. On the right side of the virtual system , double-click the shortcut key sequence , respectively :
"Games" 01 Start account services . Bat
"Games" 02 Startup Manager service . Bat
"Games" 03 start the data service . Bat
Later, in the double-click shortcuts
"Game" 04 to start the gateway service . Bat
PS. Excessive Run " game" 04 to start the gateway service . Bat, may result in the pop-up window stuck in the " ready to start " phase ; only close the " game" 04 to start the gateway service . Bat after opening a window to solve . Therefore, the " game" 04 to start the gateway service . Bat or wait a while and then start the better, consider themselves good machine , silent reading a 2,3 seconds to start up .
Code:
9. Open the "game" 04 to start the gateway service . Bat pop-up window [GameGatewayServer_Release_Windy_x64.exe], left- click of the window inside ( do not ask why , did so no harm ) , enter the letter sequence : ( case anyway )
U ( open internal console )
O ( boot server )
L ( turn off the internal console ) .
Box body eventually appear as
Keyboard UnLocked
T: Retry Server.
H: World List Refresh.
Server Open!!
Keyboard Locked
Code:
10. ( Select Operation ) Open the " game" 03 start the data service . Bat pop-up window [DBCServer_Release_x64.exe], left-click inside the window look ( do not ask why , did so no harm ) , enter the letter sequence : ( Size write anyway )
U ( open internal console )
R ( not displayed FPS refresh )
L ( turn off the internal console ) .
Box body eventually appear as
Keyboard UnLocked
'0 'TestLog
'F' Printf Connect
Show FPS: Off
Keyboard Locked
Code:
11. Open the "game" 01 startup service account . Bat pop-up window [Agent_Release_x64.exe], left- click of the window inside ( do not ask why , did so no harm ) , enter the letter sequence : ( case anyway )
U ( open internal console )
1 ( boot server )
At this time the order will pop up on your desktop several windows pop up after the back window [Agent_Release_x64.exe], left- click of the window inside ( do not ask why , did so no harm ) , enter the letter sequence : ( Case anyway )
L ( turn off the internal console )
Recommend this last case , otherwise , the console will always be active , keyboard operation will affect it .
Code:
12. Open the pop-up window 2 [GameServer_Release_Server_Windy_x64.exe], respectively, for the same operation ; Left-click inside the window look ( do not ask why , did so no harm ) , enter the letter sequence : ( case anyway )
U ( open internal console )
A ( boot server )
L ( turn off the internal console ) .
Code:
13. ( reference operation has been shut down due to PVP server , so it will not pop up ) to open pop-up window 2 [GameServer_Release_Server_Windy_x64.exe], respectively, for the same operation ; Left-click inside the window look ( do not ask why , according to the do no harm ) , enter the letter sequence : ( case anyway )
U ( open internal console )
M ( boot server )
L ( turn off the internal console ) .
At this point , the server startup is complete .[
COLOR="#8B4513"]Client part[/COLOR]
Back to the physical system :
Code:
1. Unzip [Rusty Hearts v3 has been updated XTrap.7z] to any letter in any directory.
Code:
2. Create a [RustyHearts.exe] shortcut.
Code:
3. Right [RustyHearts.exe] shortcut [ Properties ] in the [ target ] a column, the end of the original input parameters :
Space + server = http:// server operating seven recorded [COLOR="#FF0000"]IP[/COLOR] / rustyhearts.xml
For example:
Original is E: \ Rusty Hearts \ RustyHearts.exe
Modified E:\Rusty Hearts\RustyHearts.exe server=http://192.168.1.9/rustyhearts.xml
PS. Some systems , the target address bar with a " " , but subsequent fill in the content not to " " it anyway , set the entire column are not " " it anyway.
[ OK ] to save the operation.
Code:
4. Open the web browser and in the address bar [ [COLOR="#FF0000"]IP[/COLOR] ], to open the registration page can be freely registered game account ; successfully registered , it will pop up the " registered successfully " message. Subsequently , according to need whether to close the web browser.
Code:
5. Double-click operation 3 Modify good [RustyHearts.exe] shortcut to open the server into the game.Login part
Code:
1. LOGO after ( may need to click the keyboard or mouse ) appears enter the account password box, enter the account password before registration can also use the internal residual test account password.
Such as
1234 1234
123456 123456
Recognition, there have been mistakes account prompt , ignoring , click OK.
Code:
2. When prompted, click the mouse to enter the server selection , click on the OK button the bottom right corner .
Code:
3. into line selection , select "RUSKA" the word of the line, double-click or click the bottom right corner of the OK button.
Code:
4. entering character creation interface, click figures, click on the list to create ...Shut down the server part
Code:
Directly in the " game" 01 startup service account . Bat this pop-up window sequential input
U ---- open the keyboard input
5 ---- off all servers or 9 ----- forcibly shut down all servers
Then the rest of the manual shut off on it did not
