¤ The Complete PW Package ¤

[Marvin344]

What version VMWare or Virtualbox are you using? Are they updated?

Video link;

You must be registered to see links

I am Using Virtualbox Version 4.2.14 r86644

 

[Coldwin]

I am Using Virtualbox Version 4.2.14 r86644

Download the latest version;

You must be registered to see links

 

[Marvin344]

Download the latest version;

You must be registered to see links

I downloaded and installed what now?

 

[ordoabchao]

Hi,

I just wanted to really thank 343 for this amazing job.
After some research (because I am a complete newbie with Linux) I have installed a fully functional Perfect World server on my machine.
Actually I installed it on a both VMWare and Virtualbox until I was really comfortable with the installation.
Now I found a real server and I will install it on a little Dell server for friends and myself to play with. Now I try to understand how to configure the server to really do what I expect.

So thank you again for this opportunity to learn a bit and play a lot.

 

[Marvin344]

Hi,

I just wanted to really thank 343 for this amazing job.
After some research (because I am a complete newbie with Linux) I have installed a fully functional Perfect World server on my machine.
Actually I installed it on a both VMWare and Virtualbox until I was really comfortable with the installation.
Now I found a real server and I will install it on a little Dell server for friends and myself to play with. Now I try to understand how to configure the server to really do what I expect.

So thank you again for this opportunity to learn a bit and play a lot.

Did 1.5.1 work for you ? i get everytime an error -.-

EDIT:
After long time waiting i got this Error:
REMOVED
I think RAM is missing

 

[ordoabchao]

Did 1.5.1 work for you ? i get everytime an error -.-

Yes it works, first I installed the original package (PW 136) and then i installed the PW 151 package.
Then I can switch from versions using the command "service pwversion 151" or "service pwversion 136".
Everything worked fine, I even tried to install all the PW packages so I can switch between version 131, 136, 146 and 151. Unfortunately I also added the FW package to try and I got MySQl error.

So I can confirm if you first install pw-136-server_07.JAN.2014-ubuntu12.04.3_amd64 and then pw-151-server_07.JAN.2014-ubuntu12.04.3_amd64 you will have a fonctional Perfect World 1.5.1 server running.

 

[Marvin344]

Yes it works, first I installed the original package (PW 136) and then i installed the PW 151 package.
Then I can switch from versions using the command "service pwversion 151" or "service pwversion 136".
Everything worked fine, I even tried to install all the PW packages so I can switch between version 131, 136, 146 and 151. Unfortunately I also added the FW package to try and I got MySQl error.

So I can confirm if you first install pw-136-server_07.JAN.2014-ubuntu12.04.3_amd64 and then pw-151-server_07.JAN.2014-ubuntu12.04.3_amd64 you will have a fonctional Perfect World 1.5.1 server running.

How much RAM did you allocated?

 

[ordoabchao]

I allocated 8 Go, juste juste starter world map, mal 62 ans a couple of others fort thé moment.

 

[Coldwin]

I allocated 8 Go, juste juste starter world map, mal 62 ans a couple of others fort thé moment.

What's your processor?

 

[ordoabchao]

What's your processor?

PWServer runs in a VirtualBox. Hosting machine is a dual Xeon 5440 with 20 Go RAM. I allocated 8 Go RAM ans 2 processors for the PW VirtualBox. The server also hosts a Lineage II server. Anyway I think the CPU type is not really relevant for hosting a small server.

 

[Coldwin]

PWServer runs in a VirtualBox. Hosting machine is a dual Xeon 5440 with 20 Go RAM. I allocated 8 Go RAM ans 2 processors for the PW VirtualBox. The server also hosts a Lineage II server. Anyway I think the CPU type is not really relevant for hosting a small server.

The CPU is good enough to run the whole PWServer. And 4GB is left for the PW Client.

What's your graphics card?

 

[Marvin344]

The CPU is good enough to run the whole PWServer. And 4GB is left for the PW Client.

What's your graphics card?

Is the AMD Phenom II X4 B50 good for running a server?

 

[Regano]

The CPU is good enough to run the whole PWServer. And 4GB is left for the PW Client.

What's your graphics card?

GTX 660.
your Footer gif xD



help me :*:

¤ The Complete PW Package ¤
Newest Release:
07 / January / 2014 @ 00:00:00 UTC/GMT

why not offline authd on pwAdmin?
136,131,146,151 all have errors.
other person is working properly?

You must be registered to see links

 

[Marvin344]

GTX 660.
your Footer gif xD



help me :*:

¤ The Complete PW Package ¤
Newest Release:
07 / January / 2014 @ 00:00:00 UTC/GMT

why not offline authd on pwAdmin?
136,131,146,151 all have errors.
other person is working properly?

131 is working for me, 136 too, 146 not (when i done with install, there is no folder) 151 not (not enough ram)

 

[R3zonance]

Anyone else noticed you can't do the XML editing stuff on the 1.5.1 release @ pwAdmin?
1. This issue remains on XML Mode once you check a character and want to edit this.
2. The Edit XML Plugin does show the XML data, claims it has "saved" the data... But this claim is actually misplaced since it isn't saved at all.

No idea what I'm missing at this part?
Having the exact same issue as Coldwin has.

Nothing's manually changed though.

 

[Coldwin]

Is the AMD Phenom II X4 B50 good for running a server?

It has great power to run both perfect world server and client.

GTX 660.
your Footer gif xD



help me :*:

¤ The Complete PW Package ¤
Newest Release:
07 / January / 2014 @ 00:00:00 UTC/GMT

why not offline authd on pwAdmin?
136,131,146,151 all have errors.
other person is working properly?

You must be registered to see links

I wish I had a graphics card like yours... I would be able to run every game I own in the best quality without lag...

The footer is based on Nigel Thornberry

As for the authd, did you install all the servers in the same virtual machine?

131 is working for me, 136 too, 146 not (when i done with install, there is no folder) 151 not (not enough ram)

All the releases are working for me. Your downloaded files are probably corrupted... Did you check the MD5 codes of your files with the ones provided by 343?

Anyone else noticed you can't do the XML editing stuff on the 1.5.1 release @ pwAdmin?
1. This issue remains on XML Mode once you check a character and want to edit this.
2. The Edit XML Plugin does show the XML data, claims it has "saved" the data... But this claim is actually misplaced since it isn't saved at all.

No idea what I'm missing at this part?
Having the exact same issue as Coldwin has.

Nothing's manually changed though.

The Edit XML is only for 1.4.5, 1.4.6 and 1.4.7 only...

I tried eveything and I still couldnt edit my XML data. Making a private server is useless without being able to edit your character. So I use 146 instead, everything works in 146.

I only use 146 because of new armours and its the best working server next to 136.

 

[Regano]

It has great power to run both perfect world server and client.





I wish I had a graphics card like yours... I would be able to run every game I own in the best quality without lag...

The footer is based on Nigel Thornberry

As for the authd, did you install all the servers in the same virtual machine?

Yes.
This problem has occurred at the time of 136,131,146,151 all Versions.
authd NOT offline.

serverctrl.jsp say "Map (s) Stopped"
but maps not killed. (not stop map service)

I have created an installation guide.
I'm actually working on the basis of the steps in this guide.
have something bad points?

Spoiler

Install (VMware and VBOX,network Bridge)
VMware User:
please put a check in the "later install the OS" in the installation of the guest OS.
Virtual Machine Settings:CD/DVD, Un Check [Connect at power on]
-----Install Ubuntu-----
Software Selection
WinSCP(FileManager and Command Line Front End) use [select]OpenSSH server
or
non Select
-------------------------
After Install.
($ is Ubuntu Command)
###set root password###
ubuntu login:Your username.
$sudo passwd root
$logoout
ubuntu login:root

###Disable IPv6###
#Check IPv6 features
$cat /proc/net/if_inet6
# If the entry exists = IPv6 Enabled.
# no Entry exist = IPv6 Disabled.

$nano /etc/sysctl.conf
#nano Command, ^=Ctrl
add this.
=====================
# Disable IPv6
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
=====================
#Apply Settings
sysctl -p
$cat /proc/net/if_inet6

###IP address fixing###
#e.g.
#your.server.ip.address 192.168.1.5
#Default Gateway(Router ip) 192.168.1.1
#DNS (Is usually router ip) 192.168.1.1

$nano /etc/network/interfaces
=====Before=====
auto eth0
iface eth0 inet dhcp
=====After=====
auto eth0
iface eth0 inet static
address 192.168.1.5
network 192.168.1.0
netmask 255.255.255.0
broadcast 192.168.1.255
gateway 192.168.1.1
dns-nameservers 192.168.1.1
============
#Apply Settings
$/etc/init.d/networking stop
$service networking start

###make cdrom Directory###
$mkdir /cdrom

###Mount CD-ROM and Install PW###
$mount /dev/cdrom /cdrom
cd /cdrom
./install-pw
press [y] or[n]
#DO NOT PRESS ENTER KEY!!
#and Please wait a few minutes.

#If fails to input a word in the setup,
$/root/notes/setup --force

#If you are not equipped with the required capacity of memory.
#or, if you want to install the other version.
#please do not enable the "System Service Daemon".

343's PW 151 Package Have This Errors.
=== AUTH ===
ERROR:incorrect passphrase for this key!
ERROR:load key failed!
authd:: add PollIO task.
gauthd: 08 Mar 2015 08:30:48,182 INFO GAuthServer:69 - authd:: add PollIO task.
=== DONE! ===

 

[Coldwin]

Yes.
This problem has occurred at the time of 136,131,146,151 all Versions.
authd NOT offline.

serverctrl.jsp say "Map (s) Stopped"
but maps not killed. (not stop map service)

I have created an installation guide.
I'm actually working on the basis of the steps in this guide.
have something bad points?

Spoiler

Install (VMware and VBOX,network Bridge)
VMware User:
please put a check in the "later install the OS" in the installation of the guest OS.
Virtual Machine Settings:CD/DVD, Un Check [Connect at power on]
-----Install Ubuntu-----
Software Selection
WinSCP(FileManager and Command Line Front End) use [select]OpenSSH server
or
non Select
-------------------------
After Install.
($ is Ubuntu Command)
###set root password###
ubuntu login:Your username.
$sudo passwd root
$logoout
ubuntu login:root

###Disable IPv6###
#Check IPv6 features
$cat /proc/net/if_inet6
# If the entry exists = IPv6 Enabled.
# no Entry exist = IPv6 Disabled.

$nano /etc/sysctl.conf
#nano Command, ^=Ctrl
add this.
=====================
# Disable IPv6
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
=====================
#Apply Settings
sysctl -p
$cat /proc/net/if_inet6

###IP address fixing###
#e.g.
#your.server.ip.address 192.168.1.5
#Default Gateway(Router ip) 192.168.1.1
#DNS (Is usually router ip) 192.168.1.1

$nano /etc/network/interfaces
=====Before=====
auto eth0
iface eth0 inet dhcp
=====After=====
auto eth0
iface eth0 inet static
address 192.168.1.5
network 192.168.1.0
netmask 255.255.255.0
broadcast 192.168.1.255
gateway 192.168.1.1
dns-nameservers 192.168.1.1
============
#Apply Settings
$/etc/init.d/networking stop
$service networking start

###make cdrom Directory###
$mkdir /cdrom

###Mount CD-ROM and Install PW###
$mount /dev/cdrom /cdrom
cd /cdrom
./install-pw
press [y] or[n]
#DO NOT PRESS ENTER KEY!!
#and Please wait a few minutes.

#If fails to input a word in the setup,
$/root/notes/setup --force

#If you are not equipped with the required capacity of memory.
#or, if you want to install the other version.
#please do not enable the "System Service Daemon".

343's PW 151 Package Have This Errors.
=== AUTH ===
ERROR:incorrect passphrase for this key!
ERROR:load key failed!
authd:: add PollIO task.
gauthd: 08 Mar 2015 08:30:48,182 INFO GAuthServer:69 - authd:: add PollIO task.
=== DONE! ===

I've used both VMWare and VirtualBox and I never faced any problems with authd.

As for your guide, a lot of things are going on at the same time.

If you aren't going to make the server public, there is no point on going though all of this, just use linux's local IP instead.

Using the command line is very confusing and requires a lot of thinking. OpenSSH server should be a must.

Why are you also turning off IPv6? IPv6 doesn't affect my authd with any means.

As for manually editing the IP address, do you know there is a command in the root folder which fixes the IP adresses?

 

[Marvin344]

It has great power to run both perfect world server and client.





I wish I had a graphics card like yours... I would be able to run every game I own in the best quality without lag...

The footer is based on Nigel Thornberry

As for the authd, did you install all the servers in the same virtual machine?





All the releases are working for me. Your downloaded files are probably corrupted... Did you check the MD5 codes of your files with the ones provided by 343?





The Edit XML is only for 1.4.5, 1.4.6 and 1.4.7 only...

I tried eveything and I still couldnt edit my XML data. Making a private server is useless without being able to edit your character. So I use 146 instead, everything works in 146.

I only use 146 because of new armours and its the best working server next to 136.

I checked both
And the Result is that:
REMOVED

 

[Coldwin]

@Marvin344 Did you also check the MD5 files for ubuntu-12.04.3-server-amd64.iso and pw-136-server_07.JAN.2014-ubuntu12.04.3_amd64.iso? There are more files you should check.