CF 3.0 Source Code ipgra Source 

UID = RneS90l411DRWD5Rwc6+eg==

PWD = yEwCwVKk57DQeOreWUp+DcektWp3lbXSv+DVeQC4PRY=

used SafePassword.cs do decrypt

im using those
gladcf and its password
what is right config then for ha.ini

i didn'f figureout how to run other services(ha , ma , mc)

i just know what it ccauses the problem but i cant fix it

i think the auth key checks on HA but im not able to run those

i'm leaving this to someone understand
It seems to be a protocol mismatch issue. Ma and HA can establish a connection, but it appears in the log NozomiNPC,MA,2025-11-16+08:24:41,595,warn,[+NOT+INSTALLED+DATABASE+][+INVALID+PACKET+First+241+Second+3+Third+1+]NozomiNPC,MA,2025-11-16+08:24:41,612,warn,[+NOT+INSTALLED+DATABASE+][+INVALID+PACKET+First+241+Second+207+Third+8+]

UID = RneS90l411DRWD5Rwc6+eg==

PWD = yEwCwVKk57DQeOreWUp+DcektWp3lbXSv+DVeQC4PRY=

used SafePassword.cs do decrypt

im using those
gladcf and its password
what is right config then for ha.ini

i didn'f figureout how to run other services(ha , ma , mc)

i just know what it ccauses the problem but i cant fix it

i think the auth key checks on HA but im not able to run those

i'm leaving this to someone understand
Additionally, it seems that ha's UID is not encrypted

UID = RneS90l411DRWD5Rwc6+eg==

PWD = yEwCwVKk57DQeOreWUp+DcektWp3lbXSv+DVeQC4PRY=

used SafePassword.cs do decrypt

im using those
gladcf and its password
what is right config then for ha.ini

i didn'f figureout how to run other services(ha , ma , mc)

i just know what it ccauses the problem but i cant fix it

i think the auth key checks on HA but im not able to run those

i'm leaving this to someone understand
ha.ini:
[DB]
SERVER=127.0.0.1
NAME=DBNAME
ID=sa
PASS=

[SYSTEM]
BOOTSTART=OFF
AUTOSTART=OFF
RESTART_TIME=10
SAFE_TERMINATE=OFF


[LOG]
LEVEL=7
BaseLogFolder=C:\Log

ma.ini:
[LOG]
LEVEL=7
BaseLogFolder=C:\Log

[ServerInfo]
ServerServiceForceIP=127.0.0.1
ServerServiceForcePort=9898
ServerMaxUser=100
ServerMaxBufferSize=1024

[SYSTEM]
MailHost=
MailFrom=
MailUser=
MailPass=
MailSSL=true
MailPort=465
 
Last edited:
It seems to be a protocol mismatch issue. Ma and HA can establish a connection, but it appears in the log NozomiNPC,MA,2025-11-16+08:24:41,595,warn,[+NOT+INSTALLED+DATABASE+][+INVALID+PACKET+First+241+Second+3+Third+1+]NozomiNPC,MA,2025-11-16+08:24:41,612,warn,[+NOT+INSTALLED+DATABASE+][+INVALID+PACKET+First+241+Second+207+Third+8+]


Additionally, it seems that ha's UID is not encrypted


ha.ini:
[DB]
SERVER=127.0.0.1
NAME=DBNAME
ID=sa
PASS=

[SYSTEM]
BOOTSTART=OFF
AUTOSTART=OFF
RESTART_TIME=10
SAFE_TERMINATE=OFF


[LOG]
LEVEL=7
BaseLogFolder=C:\Log

ma.ini:
[LOG]
LEVEL=7
BaseLogFolder=C:\Log

[ServerInfo]
ServerServiceForceIP=127.0.0.1
ServerServiceForcePort=9898
ServerMaxUser=100
ServerMaxBufferSize=1024

[SYSTEM]
MailHost=
MailFrom=
MailUser=
MailPass=
MailSSL=true
MailPort=465
use database HGW with this?
 
It seems to be a protocol mismatch issue. Ma and HA can establish a connection, but it appears in the log NozomiNPC,MA,2025-11-16+08:24:41,595,warn,[+NOT+INSTALLED+DATABASE+][+INVALID+PACKET+First+241+Second+3+Third+1+]NozomiNPC,MA,2025-11-16+08:24:41,612,warn,[+NOT+INSTALLED+DATABASE+][+INVALID+PACKET+First+241+Second+207+Third+8+]


Additionally, it seems that ha's UID is not encrypted


ha.ini:
[DB]
SERVER=127.0.0.1
NAME=DBNAME
ID=sa
PASS=

[SYSTEM]
BOOTSTART=OFF
AUTOSTART=OFF
RESTART_TIME=10
SAFE_TERMINATE=OFF


[LOG]
LEVEL=7
BaseLogFolder=C:\Log

ma.ini:
[LOG]
LEVEL=7
BaseLogFolder=C:\Log

[ServerInfo]
ServerServiceForceIP=127.0.0.1
ServerServiceForcePort=9898
ServerMaxUser=100
ServerMaxBufferSize=1024

[SYSTEM]
MailHost=
MailFrom=
MailUser=
MailPass=
MailSSL=true
MailPort=465
note from old server:

Open CMD and execute ./PSC.exe -m PASSWORD
- Where PASSWORD is your database password.

This command will print out your encrypted password to be used for MA and HA.

- Go to MA folder and open MA.ini, find "PASS" and replace "YOUR_PSC_PASSWORD" by the your encrypted password
- Go to HA folder and open HA.ini and do the same.

1.0

MC_StandAlone.reg:

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Software\Neowiz\PMS\MC]
"MA_IP"="127.0.0.1"
"MC_MODE"="1"
"MC_FORM"="1"
"MC_SECURE"="1"



I have this server I don't know if it's ok but I can play zombie nano

what is password for pmang
 
Last edited:
I found a pirated server open cf 3.0 sieudotkich io

can someone reverse that launcher
its same as rage with link.ini and public_key.pem and also gets failed to load data if try open with .bat
 
What's the password?
mate i think its same as sa2203 code you can find it here page(7) of this post the mediafire mirror

i know someone did alot of process for this project(ipgra) and managed to get actuall usn and gamesrv making a cmd with text like the gui server that bola has its photo and enter the channel but after select channel gives the 3main characters the gamesrv stops
any one problem related to this or similar even how to skip 3main character like put what in user database for defult carakter and another karaktr for inventory(no newlobby-error moving to channel list--select..1234--3mainKrktr--game server stops with disconnect from client
 
Last edited:
note from old server:

Open CMD and execute ./PSC.exe -m PASSWORD
- Where PASSWORD is your database password.

This command will print out your encrypted password to be used for MA and HA.

- Go to MA folder and open MA.ini, find "PASS" and replace "YOUR_PSC_PASSWORD" by the your encrypted password
- Go to HA folder and open HA.ini and do the same.

1.0

MC_StandAlone.reg:

Windows Registry Editor Version 5.00

[HKEY_CURRENT_USER\Software\Neowiz\PMS\MC]
"MA_IP"="127.0.0.1"
"MC_MODE"="1"
"MC_FORM"="1"
"MC_SECURE"="1"


what is password for pmang
I'm re-uploading the link without password



pmang
run it in your computer's C Drive
 
mate i think its same as sa2203 code you can find it here page(7) of this post the mediafire mirror

i know someone did alot of process for this project and managed to get actuall usn and gamesrv making a cmd with text like the gui server that bola has its photo and enter the channel but after select channel gives the 3main characters the gamesrv stops
any one problem related to this or similar even how to skip 3main character like put what in user database for defult carakter and another karaktr for inventory(no newlobby-error moving to channel list--select..1234--3mainKrktr--game server stops with disconnect from client
There seems to be a section of code commented out in the Gamesrv code that mentions character related content
 
There seems to be a section of code commented out in the Gamesrv code that mentions character related content
note this an old comment:
"I'm using the penultimate version of CrossFire West 2.0. The last update they had before they migrated to version 3.0.From what they showed in the project's Discord, the login server is working in version 3.0,( but some packages such as server list is incorrect for this version.) yes i think the problem like this because it disconnect even before selecet an karktr there alot of process being sent then gamesrv stops
"
-and what is the section for gamesrv devolop is it on release or help
 
note this an old comment:
"I'm using the penultimate version of CrossFire West 2.0. The last update they had before they migrated to version 3.0.From what they showed in the project's Discord, the login server is working in version 3.0,( but some packages such as server list is incorrect for this version.) yes i think the problem like this because it disconnect even before selecet an karktr there alot of process being sent then gamesrv stops
"
-and what is the section for gamesrv devolop is it on release or help
I'm not sure, I think I saw it when analyzing in IPGRA v2/Gamesrv. I suggest you check it out
 
I'm not sure, I think I saw it when analyzing in IPGRA v2/Gamesrv. I suggest you check it out
oh i get it its in the source like next to #note

im using an old laptop cant even run vs or debug something and from a while to another i get bios screen while hard process and must unplug then plug the hard drive to make run again so leavin it unscrewed

if i just figure out how the client login by using right bat file i can make sa2203 code with it

because the emulator open in weird way i searched every paramater in the database and the no something releatd thouught its just an emulator will select usn 1 by defullt but not when changing ,bat it not connects so how with no match in database that what i wanna know
 
Last edited:
oh i get it its in the source like next to #note

im using an old laptop cant even run vs or debug something and from a while to another i get bios screen while hard process and must unplug then plug the hard drive to make run again so leavin it unscrewed

if i just figure out how the client login by using right bat file i can make sa2203 code with it

because the emulator open in weird way i searched every paramater in the database and the no something releatd thouught its just an emulator will select usn 1 by defullt but not when changing ,bat it not connects so how with no match in database that what i wanna know
If the Gamesrv service is fully compiled, then there are still some missing tables in the database, including tables for default character configuration and default equipment configuration. I think this should be the problem mentioned above,
 
If the Gamesrv service is fully compiled, then there are still some missing tables in the database, including tables for default character configuration and default equipment configuration. I think this should be the problem mentioned above,
yes i'm tryna edit DBGWMGR.ini and using the simple values instead of the main one and also gets an errors
 
yes i'm tryna edit DBGWMGR.ini and using the simple values instead of the main one and also gets an errors
Can you help me rebuild the PMS, launcher, webdb, and dbgwmgr.ini of IPGRA? Thank you, At present, the launcher and PMS configuration have been completed, and the issue of inconsistent protocols has been fixed. However, there is no storage query in the database and dbgwmgr.ini
 
Can you help me rebuild the PMS, launcher, webdb, and dbgwmgr.ini of IPGRA? Thank you, At present, the launcher and PMS configuration have been completed, and the issue of inconsistent protocols has been fixed. However, there is no storage query in the database and dbgwmgr.ini
just contacted discord:_m_7_d_ and said let him send what he wants and he can help but he needs to know what you need exactly to edit and he good at code and other

just contact him i just did telling about you
i really wants to help but im just don't understand much
 
Last edited:
just contacted discord:m7md_mahdy and said let him send what he wants and he can help but he needs to know what you need exactly to edit and he good at code and other

just contact him i just did telling about you
i really wants to help but im just don't understand much
Thank you, brother.
 
If any one have emulator source code please share it

I found a pirated server open cf 3.0 sieudotkich io
can't create email to enter game
i wanted to capture that extra files that being downloading from internet for first lunch but no way unless you make an acc
protected
 
Last edited:
Back