[##error##] Helpp !!

[vladiks]

[Mon Jul 14 2008 05:50:51.323573 4158600928]: [##ERROR##] connect 77.38.220.213:38180 fail
[Mon Jul 14 2008 05:50:51.323646 4158600928]: [##ERROR##] Link(): link open fail, Exit
[Mon Jul 14 2008 05:50:51.323864 4158600928]: [##ERROR##] active fail

 

[xz3r0x]

your centos cant see your public ip, just create an ip alias on your centos Ethernet card:

# First load the IP Alias module (you can skip this step if you compiled the module into the kernel):

/sbin/insmod /lib/modules/`uname -r`/ipv4/ip_alias.o

# Second, setup the ethernet card and an ip alias

/sbin/ifconfig eth0 up
/sbin/ifconfig eth0:0 YOUR_PUBLIC_IP

# Third, setup the routes.

/sbin/route add -host YOUR_PUBLIC_IP dev eth0:0

eth0 is your main centos ethernet card device

 

[vladiks]

eth0      Link encap:Ethernet  HWaddr 00:0C:29:F2:DC:57
          inet addr:192.168.126.130  Bcast:192.168.126.255  Mask:255.255.255.0
          inet6 addr: fe80::20c:29ff:fef2:dc57/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:183968 errors:0 dropped:0 overruns:0 frame:0
          TX packets:75561 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:132548393 (126.4 MiB)  TX bytes:33801211 (32.2 MiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:39165 errors:0 dropped:0 overruns:0 frame:0
          TX packets:39165 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:10304382 (9.8 MiB)  TX bytes:10304382 (9.8 MiB)

peth0     Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:183981 errors:0 dropped:0 overruns:0 frame:0
          TX packets:85616 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:132549560 (126.4 MiB)  TX bytes:34354511 (32.7 MiB)
          Interrupt:16 Base address:0x2000

vif0.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:75588 errors:0 dropped:0 overruns:0 frame:0
          TX packets:183982 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:33805321 (32.2 MiB)  TX bytes:132549233 (126.4 MiB)

virbr0    Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          inet addr:192.168.122.1  Bcast:192.168.122.255  Mask:255.255.255.0
          inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:11030 (10.7 KiB)

xenbr0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:490 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:47352 (46.2 KiB)  TX bytes:0 (0.0 b)

IP >> 192.168.126.130 ?

 

[xz3r0x]

NO! your public ip is 77.38.220.213 (maybe.. i just see it in your logs) public ip is an ip which u get in

You must be registered to see links

or other similar page

 

[vladiks]

77.38.220.213

 

[xz3r0x]

77.38.220.213

yes just do in putty

/sbin/insmod /lib/modules/`uname -r`/ipv4/ip_alias.o
/sbin/ifconfig eth0 up
/sbin/ifconfig eth0:0 77.38.220.213
/sbin/route add -host 77.38.220.213 dev eth0:0

 

[vladiks]

cd /
/sbin/insmod /lib/modules/`uname -r`/ipv4/ip_alias.o

>> No such file or directory

I BOT !! NO LIKE LInux !

 

[xz3r0x]

just ignore that, that module is compiled in kernel already, so just do the rest of commands

and ifconfig should return to you a new device named eth0:0

sorry my mistake..

 

[vladiks]

I BOT !!
I do not understand