Flyff v15 Official Setup Guide + Repack

jason145 · May 26, 2010

musiboy said:
Hey people, got another question, is this the full v15? i mean, the max level becomes 129, dryad sets are there ... 135 mobs+ the new dungeon ... ? Is it all here? or that's just half of those or something.

Its ll there man. Works really good too.

lenspsv · May 26, 2010

error.txt in flyff folder:

- Registers

EAX=FFFFFFFF EBX=00000000 ECX=FFFFFFF5 EDX=09BC3074 ESI=09BC3074
EDI=00000001 EBP=0018FE38 ESP=0018FE00 EIP=7609135D FLG=00010286
CS=0023 DS=002B SS=002B ES=002B FS=0053 GS=002B

0023:7609135D kernel32.dll
0023:006C3970 NeuzUnique.exe
0023:006C385F NeuzUnique.exe
0023:006B6414 NeuzUnique.exe
0023:00764A4D NeuzUnique.exe
0023:008AF7C5 NeuzUnique.exe
0023:76093677 kernel32.dll
0023:77A39D72 ntdll.dll
0023:77A39D45 ntdll.dll

profile.txt in server files folder:

2010/05/26 14:24:43
Root
---> 100.00% CRunObject::Run(), <12639.288 ms>, <846 calls>, <14.940057 ms/call>
|---> 0.06% 1SEC_Process, <7.325 ms>, <1 calls>, <7.325120 ms/call>
| |---> 0.00% CPCBang:

rocessPCBang(), <0.053 ms>, <1 calls>, <0.052680 ms/call>
| |---> 0.02% CRainbowRaceMng:

rocess(), <2.077 ms>, <1 calls>, <2.076640 ms/call>
| |---> 0.02% CSecretRoomMng:

rocess(), <2.061 ms>, <1 calls>, <2.060880 ms/call>
|---> 0.45% g_WorldMng.Respawn(), <56.749 ms>, <1 calls>, <56.748960 ms/call>
|---> 0.00% g_dpDBClient.ReceiveMessage(), <0.608 ms>, <15 calls>, <0.040539 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x8fff000b), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x8fff000c), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x00000014), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0xffffff3c), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0xf000f712), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x70000111), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x8fff0007), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x70001000), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x8ffff004), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x88100120), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x88100000), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x70006010), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0xf000d021), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0xf000f117), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x0000001e), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0xf000f005), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0xf000d005), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0xf000d004), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0xf000d003), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0xf000f803), <0.000 ms>, <0 calls>, <0.000000 ms/call>
|---> 0.00% g_DPCoreClient.ReceiveMessage(), <0.445 ms>, <15 calls>, <0.029672 ms/call>
| |---> 0.00% CDPCoreClient::UserMessageHandler(0x00ff00f6), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPCoreClient::UserMessageHandler(0x00000014), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPCoreClient::UserMessageHandler(0xf000d026), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPCoreClient::UserMessageHandler(0x00001000), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPCoreClient::UserMessageHandler(0x00000003), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPCoreClient::UserMessageHandler(0x00000004), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPCoreClient::UserMessageHandler(0x0000000b), <0.000 ms>, <0 calls>, <0.000000 ms/call>
|---> 0.01% g_DPSrvr.ReceiveMessage(), <1.601 ms>, <15 calls>, <0.106701 ms/call>
|---> 88.41% CWorldMng:

rocess(), <11173.855 ms>, <15 calls>, <744.923655 ms/call>
| |---> 12.47% CMover:

rocess(), <1576.302 ms>, <273690 calls>, <0.005759 ms/call>

this all are the errors i could find
I'll get them when i try to login, error in flyff is:
Cannot connect to the game, check the network (or something like taht

)

EDIT: in the error.txt it says something with kernel32.dll and ntdll.dll but i dont have that files in my flyff folder? :O

SirTwistedStorm · May 26, 2010

hey I have my test server running fine but for the life of me I cant get my client to run in English it always opens in German
I've downloaded every neuz that should be English but when I open them they open in German still can anyone help me out?

isma4ever · May 26, 2010

Deleted...

cachero18 · May 26, 2010

can someone help on my problem pls D;

kclaire07 · May 27, 2010

can i request a new mirror for the new files?

rapidshare is such a pain in the ass.

kind uploaders may use mediafire for example. thanks.

isma4ever · May 27, 2010

Deleted...

isma4ever · May 27, 2010

I have an error in the World Server, I can not enter the game...

Thrinaria - Flyff v15 Official Setup Guide + Repack - RaGEZONE Forums

... This screen does not ever finish loading.

Here is my error.txt:

2010/ 5/27 01:18:17 OP: 97813009, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0

2010/ 5/27 01:18:35 OP: 18417, 0.0, 0.0, 18415.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0

2010/ 5/27 01:18:36 LUA - Event - ID:2, Title:Quit Event, State:1

2010/ 5/27 01:18:40 OP: 4125, 0.0, 0.0, 0.0, 0.0, 0.0, 4123.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0

2010/ 5/27 01:25:49 rCnt=1

7.WorldServer_summon.exe caused an EXCEPTION_ACCESS_VIOLATION in module kernel32.dll at 001B:7C809823, InterlockedDecrement()+0009 byte(s)

- Registers

EAX=FFFFFFFF EBX=00000000 ECX=FFFFFFF5 EDX=01E07E6C ESI=01E07E6C
EDI=01E07A10 EBP=0012FEB8 ESP=0012FE80 EIP=7C809823 FLG=00010286
CS=001B DS=0023 SS=0023 ES=0023 FS=003B GS=0000

001B:7C809823 (0x01E07E6C 0x00000004 0x00000000 0x005D93CD) kernel32.dll, InterlockedDecrement()+0009 byte(s)
001B:0053E4CB (0x00000000 0x00000000 0x00000000 0x00000000) 7.WorldServer_summon.exe

2010/ 5/27 01:27:53 OP: 98389226, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0

2010/ 5/27 01:28:12 OP: 18317, 0.0, 0.0, 18315.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0

2010/ 5/27 01:28:12 LUA - Event - ID:2, Title:Quit Event, State:1

2010/ 5/27 01:28:15 OP: 3366, 0.0, 0.0, 0.0, 0.0, 0.0, 3363.0, 0.0, 1.0, 0.0, 0.0, 0.0, 0.0

What do I have to do?

:

flashdeddy · May 27, 2010

do you have the database query??

lenspsv · May 27, 2010

lenspsv said:
error.txt in flyff folder:

- Registers

EAX=FFFFFFFF EBX=00000000 ECX=FFFFFFF5 EDX=09BC3074 ESI=09BC3074
EDI=00000001 EBP=0018FE38 ESP=0018FE00 EIP=7609135D FLG=00010286
CS=0023 DS=002B SS=002B ES=002B FS=0053 GS=002B

0023:7609135D kernel32.dll
0023:006C3970 NeuzUnique.exe
0023:006C385F NeuzUnique.exe
0023:006B6414 NeuzUnique.exe
0023:00764A4D NeuzUnique.exe
0023:008AF7C5 NeuzUnique.exe
0023:76093677 kernel32.dll
0023:77A39D72 ntdll.dll
0023:77A39D45 ntdll.dll

profile.txt in server files folder:

2010/05/26 14:24:43
Root
---> 100.00% CRunObject::Run(), <12639.288 ms>, <846 calls>, <14.940057 ms/call>
|---> 0.06% 1SEC_Process, <7.325 ms>, <1 calls>, <7.325120 ms/call>
| |---> 0.00% CPCBang:rocessPCBang(), <0.053 ms>, <1 calls>, <0.052680 ms/call>
| |---> 0.02% CRainbowRaceMng:rocess(), <2.077 ms>, <1 calls>, <2.076640 ms/call>
| |---> 0.02% CSecretRoomMng:rocess(), <2.061 ms>, <1 calls>, <2.060880 ms/call>
|---> 0.45% g_WorldMng.Respawn(), <56.749 ms>, <1 calls>, <56.748960 ms/call>
|---> 0.00% g_dpDBClient.ReceiveMessage(), <0.608 ms>, <15 calls>, <0.040539 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x8fff000b), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x8fff000c), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x00000014), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0xffffff3c), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0xf000f712), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x70000111), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x8fff0007), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x70001000), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x8ffff004), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x88100120), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x88100000), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x70006010), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0xf000d021), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0xf000f117), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0x0000001e), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0xf000f005), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0xf000d005), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0xf000d004), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0xf000d003), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPDatabaseClient::UserMessageHandler(0xf000f803), <0.000 ms>, <0 calls>, <0.000000 ms/call>
|---> 0.00% g_DPCoreClient.ReceiveMessage(), <0.445 ms>, <15 calls>, <0.029672 ms/call>
| |---> 0.00% CDPCoreClient::UserMessageHandler(0x00ff00f6), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPCoreClient::UserMessageHandler(0x00000014), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPCoreClient::UserMessageHandler(0xf000d026), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPCoreClient::UserMessageHandler(0x00001000), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPCoreClient::UserMessageHandler(0x00000003), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPCoreClient::UserMessageHandler(0x00000004), <0.000 ms>, <0 calls>, <0.000000 ms/call>
| |---> 0.00% CDPCoreClient::UserMessageHandler(0x0000000b), <0.000 ms>, <0 calls>, <0.000000 ms/call>
|---> 0.01% g_DPSrvr.ReceiveMessage(), <1.601 ms>, <15 calls>, <0.106701 ms/call>
|---> 88.41% CWorldMng:rocess(), <11173.855 ms>, <15 calls>, <744.923655 ms/call>
| |---> 12.47% CMover:rocess(), <1576.302 ms>, <273690 calls>, <0.005759 ms/call>

this all are the errors i could find
I'll get them when i try to login, error in flyff is:
Cannot connect to the game, check the network (or something like taht )

EDIT: in the error.txt it says something with kernel32.dll and ntdll.dll but i dont have that files in my flyff folder? :O

help me plz?

isma4ever · May 27, 2010

flashdeddy said:
do you have the database query??

I need it? :O:

sykefu · May 27, 2010

so, i created myself an account using mssql 2005 thingy, but whenever i try to login, it says login details incorrect ... anyone can help me ? please

lenspsv · May 27, 2010

Show us the inlog name + md5 code
And with stored procedure did you used to make account?

sykefu · May 27, 2010

i'm not sure i understand everything but well, looking at a few try from different people to make a character i've came up with this to create an account

Code:

USE [ACCOUNT_DBF]
GO

DECLARE	@return_value int

EXEC	@return_value = [dbo].[usp_CreateNewAccount]
		@account = N'testacc',
		@pw = N'05ee860e46697c872db9a3dd9c664383',
		@cash = 1000,
		@email = N'[email protected]'

SELECT	'Return Value' = @return_value

GO

the pw should be test, for making the md5 i wrote serustest

Edit: it works now, tried making another account, might have had a typo in the pw the first time though, now it won't connect, it stays forever at connecting please wait.

isma4ever · May 27, 2010

sykefu said:
Edit: it works now, tried making another account, might have had a typo in the pw the first time though, now it won't connect, it stays forever at connecting please wait.

I have your same error... :Cry:

FtwHoly · May 27, 2010

Lol srly, it's easy to get it up. I can't understand why people don't try to fix errors by themself o-o.

Ok I have to admit, some errors are hard to fix but wtf

sykefu · May 27, 2010

well, i've been trying for like one hour to fix that never ending loading thing, but i'm still quite new to private servers :/

Atix520 · May 27, 2010

I keep getting wrong password :s

I did everything like in the guide

Code:

USE [ACCOUNT_DBF]
GO

DECLARE	@return_value int

EXEC	@return_value = [dbo].[usp_CreateNewAccount]
		@account = N'test',
		@pw = N'05ee860e46697c872db9a3dd9c664383',
		@cash = 50,
		@email = N'test@test'

SELECT	'Return Value' = @return_value

GO

I'm just using this pserver to test out the new things in v15
and it's the first time I'm trying to make a pserver

If someone wants to help, thanks.

isma4ever · May 27, 2010

FtwHoly said:
Lol srly, it's easy to get it up. I can't understand why people don't try to fix errors by themself o-o.

Ok I have to admit, some errors are hard to fix but wtf

Can you help me with my problem? :blush:

Lykos94 · May 27, 2010

isma4ever said:
Can you help me with my problem? :blush:

I'll try. For some time i had the same problem...are you sure your md5 key is serus? my is kikugalanet even if i use serus files

Flyff v15 Official Setup Guide + Repack

Skilled Illusionist

Experienced Elementalist

Unity Developer

Newbie Spellweaver

Newbie Spellweaver

Newbie Spellweaver

Newbie Spellweaver

Newbie Spellweaver

Newbie Spellweaver

Experienced Elementalist

Newbie Spellweaver

Newbie Spellweaver

Experienced Elementalist

Newbie Spellweaver

Newbie Spellweaver

Skilled Illusionist

Newbie Spellweaver

Newbie Spellweaver

Newbie Spellweaver

Junior Spellweaver

RaGEZONE Sponsor

About RaGEZONE

Forum Statistics

RaGEZONE Partners