Flyff v15 Official Setup Guide + Repack

[bhem2k9]

@isma4ever
why dont you use the promitem.txt and propitem.txt.txt provided by serus???

 

[isma4ever]

I replaced them with some bad and I did not back up ...

 

[bhem2k9]

lol, try to use eflyff's datasub2.res, it contains propitem.txt

 

[fretelo]

Hey, everything works fine, except after i choose my character and enter the pin it gets stuck at "connecting please wait.." this is the client error:


2010/ 6/ 1 14:52:53 Feb 22 2010 05:50:57 1 rCnt=1

NeuzUnique.exe caused an EXCEPTION_ACCESS_VIOLATION in module kernel32.dll at 001B:7C809823, InterlockedDecrement()+0009 byte(s)

- Registers

EAX=FFFFFFFF EBX=00000000 ECX=FFFFFFF5 EDX=04AB7B74 ESI=04AB7B74
EDI=00000001 EBP=0013FE70 ESP=0013FE38 EIP=7C809823 FLG=00010286
CS=001B DS=0023 SS=0023 ES=0023 FS=003B GS=0000

001B:7C809823 kernel32.dll, InterlockedDecrement()+0009 byte(s)
001B:006C3970 NeuzUnique.exe
001B:006C385F NeuzUnique.exe
001B:006B6414 NeuzUnique.exe
001B:00764A4D NeuzUnique.exe
001B:008AF7C5 NeuzUnique.exe
001B:7C817077 kernel32.dll, RegisterWaitForInputIdle()+0073 byte(s)


Thanks heaps if anyone can help out

 

[alist3r06]

how fix the connecting please wait?

 

[sykefu]

how fix the connecting please wait?

you mean, when you try to log a character ?

 

[fretelo]

you mean, when you try to log a character ?

He means after you select your character and enter the pin, a box pops up which says "connecting. please wait." and doesn't load the actual world.
I have the same issue, and posted an error code a few posts back.

 

[sykefu]

idk if it will work for you, but i changed the port in neuz from 5400 to 15400 with ResHacker and now it works.

 

[fretelo]

idk if it will work for you, but i changed the port in neuz from 5400 to 15400 with ResHacker and now it works.

Hey thanks for the reply, i changed the port in both NeuzUnique.exe and CacheServer.ini , but it still sits at "connecting. please wait." after i select my character :S any other ideas?

here is the error.txt again:


2010/ 6/ 1 18:36:40 Feb 22 2010 05:50:57 1 rCnt=1

NeuzUnique.exe caused an EXCEPTION_ACCESS_VIOLATION in module kernel32.dll at 001B:7C809823, InterlockedDecrement()+0009 byte(s)

- Registers

EAX=FFFFFFFF EBX=00000000 ECX=FFFFFFF5 EDX=04AB7B74 ESI=04AB7B74
EDI=00000001 EBP=0013FE70 ESP=0013FE38 EIP=7C809823 FLG=00010286
CS=001B DS=0023 SS=0023 ES=0023 FS=003B GS=0000

001B:7C809823 kernel32.dll, InterlockedDecrement()+0009 byte(s)
001B:006C3970 NeuzUnique.exe
001B:006C385F NeuzUnique.exe
001B:006B6414 NeuzUnique.exe
001B:00764A4D NeuzUnique.exe
001B:008AF7C5 NeuzUnique.exe
001B:7C817077 kernel32.dll, RegisterWaitForInputIdle()+0073 byte(s)

 

[alist3r06]

idk if it will work for you, but i changed the port in neuz from 5400 to 15400 with ResHacker and now it works.

how i change the neuz port 5400 to 15400?

 

[demz123]

Bumpp..
Bump..
Bump..

 

[fretelo]

I fixed the issue i had where it would just sit at "connecting. please wait" just check that all the files in the "program" folder have the correct credentials, (I had forgotten to change one of the IP's to my local address)

 

[lenspsv]

I shouldn't release this but, Reshack your neuz.exe and look for the only ip in it, Remove it and replace it with your server's ip. That will enable you to use no neuz.ini file, it also solves vista's Run as admin thing too.

Confirmed with isma4ever that it does work.

Thank button anyone?

Still doesnt work:ehh:
can you add my msn or something please?
[email protected]

 

[kide]

Hello, I am kide!

For a very long time now, I've got this error:

I've read almost all pages in this forum, a few people got similar problems but it seems I can't fix it.
I've got this error for a long time now, but I was to lazy to ask people

I can't restore .bak files because I get error (above), I've also tried to remake those files into .mdf and put them into the DATA folder. Still doesn't work :S
I've also tried to run SQL Server Management Server Express as ADMIN, still doesn't work.


Any solutions are highly appericated, thank you :3

 

[musiboy]

Hello, I am kide!

For a very long time now, I've got this error:

I've read almost all pages in this forum, a few people got similar problems but it seems I can't fix it.
I've got this error for a long time now, but I was to lazy to ask people

I can't restore .bak files because I get error (above), I've also tried to remake those files into .mdf and put them into the DATA folder. Still doesn't work :S
I've also tried to run SQL Server Management Server Express as ADMIN, still doesn't work.


Any solutions are highly appericated, thank you :3

When you select it, go to Options, check Overwrite, then from the paths in the middle, change it from ..../Program Files (x86)/.... to ..../Program Files/.....

Thats how i fixed mine

------------------------------------------------------------------------------

I got a problem with the ODBC thought, when i select Server Authentication, and write down SA as user ID + my mssql password, and click next, it says couldnt connect to Server and also that the default settings could be that it blocks all Remote Connections, changed that, allowing TCP/IP Connections too, and it's still the same, same thing if i try to make the ODBC with Windows Authentication, had a V14 and i didn't have problems before with the ODBC, but i reinstalled MSSQL now and had to redo them all, and now i got that ... any help please? :?:

---------- Post added at 05:29 PM ---------- Previous post was at 05:05 PM ----------

Spoiler

Microsoft SQL Native Client Version 09.00.4035
Running connectivity tests...
Attempting connection
[Microsoft][SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [67].
[Microsoft][SQL Native Client]Login timeout expired
[Microsoft][SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
TESTS FAILED!

Thats what i get when running Connection Test :/:

 

[lenspsv]

Maybe pass is wrong.
Or try to use winows authentication

 

[kide]

The problem is, I can only select ONE .bak file, at one time!
And the removal of (x86) didn't work.

Any suggestions?

 

[musiboy]

Maybe pass is wrong.
Or try to use winows authentication

The pass is not wrong i'm sure of it.

And already tryied with Windows Auth ... same error ;/

I'm sure the pass is right since i log in with sa and the pass in SQL Server Management Studio ... and it works just fine

 

[Dell Honne]

The problem is, I can only select ONE .bak file, at one time!
And the removal of (x86) didn't work.

Any suggestions?

Your supposed to only do ONE .bak at a time, you do Restore Database > Insert Name > Insert File > Click checkbox beside the file > Go to options > Click the checkbox that says "Overwrite existing" > Execute.

And sometimes you have to add "Data/" in the place where the files will be stored.

Example : C:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA

The pass is not wrong i'm sure of it.

And already tryied with Windows Auth ... same error ;/

I'm sure the pass is right since i log in with sa and the pass in SQL Server Management Studio ... and it works just fine

Change what your connecting to, it seems that your not connecting to your MSSQL instance. Make sure your MSSQL instance is PC-Name\SQLEXPRESS, PC-Name being the name of your PC. Make sure you are using English as default and make sure the default Database is the correct one. Also check your NAMED PIPES settings in the SQL configuration manager.

Example: ZERO\SQLEXPRESS <--- make sure your using a \

To all = Make SURE your IP's are correct in ACCOUNTSERVER.INI, Then TRY the reshack method i posted above. If all else fails post what your WARNING TICK is. If your WARNING TICK is in the thousands then you probably won't be able to connect because you do NOT have enough RAM to run the server on. If it's below 1000 and you still cannot connect, look for the network logs IN THE FLYFF FOLDER and post them here, if it's a connection error then it should be logged in the file.

 

[musiboy]

Omega thanks a lot man .... i'm a f******* idiot i used / instead of \ ..... blah .. ok i'm back to work gotta finish that people are waiting xD Thanks again *using the button*

---------- Post added at 07:53 PM ---------- Previous post was at 07:26 PM ----------

Ok i got all that done, but when i run AccountServerV15 it says Can't connect to DB..... and i checked all the .ini files .. everything is fine ;/ any ideas ?