MU Connect Server_v1.0.9.920 © S@nek[BoR]

[Jonae]

Re: [Release] MU Connect Server_v1.0.9.920 © S@nek[BoR]

When i try co connect i get "You are disconnected from the server"... Can anyone post a little install guide?

 

[MuForum.Info]

Re: [Release] MU Connect Server_v1.0.9.920 © S@nek[BoR]

When i try co connect i get "You are disconnected from the server"... Can anyone post a little install guide?

Check "ProtocolMode" and "FilterMode".

 

[Jonae]

Re: [Release] MU Connect Server_v1.0.9.920 © S@nek[BoR]

Check "ProtocolMode" and "FilterMode".

I can connect now, but it is not showing users connected.

a question. when an acount gets stuck (account already connected) it will automaticaly disconect them?

 

[[RCZ]ShadowKing]

Re: [Release] MU Connect Server_v1.0.9.920 © S@nek[BoR]

I can connect now, but it is not showing users connected.

a question. when an acount gets stuck (account already connected) it will automaticaly disconect them?

cs just provide a server list,it don't manage connected users.
About user bar check the 55557 port on your gs,i had this problem too!

 

[Jonae]

Re: [Release] MU Connect Server_v1.0.9.920 © S@nek[BoR]

cs just provide a server list,it don't manage connected users.
About user bar check the 55557 port on your gs,i had this problem too!

Thanks for the info. Please can you explain more abour port 55557.

Thanks

 

[[RCZ]ShadowKing]

Re: [Release] MU Connect Server_v1.0.9.920 © S@nek[BoR]

data//lang//kor or jpn or what you use//commonloc.cfg

[ConnectServerInfo]
IP      = 127.0.0.1
PORT	= 55557

it should have this lines,if all is ok than check the firewall to see if port is blocked,if it is than allow it for local access(private access in win2k8 firewall).

PS: better check all kor,jpn,chs,vtm folder because gs may be customized and you don't know exactly folder!

 

[Flore_ncia]

Re: [Release] MU Connect Server_v1.0.9.920 © S@nek[BoR]

[01:10:38] [TTCPContext->PrepareListenSocketToNewAccept] setsockopt: 10057
[01:12:30] [TClientContext->DisconnectUser] DisconnectEx; 10057; IP-Address: 200.58.81.42

I get that message from ConnectServer, sorry my english.

 

[MuForum.Info]

Re: [Release] MU Connect Server_v1.0.9.920 © S@nek[BoR]

# Update to version 1.0.9.980:

You must be registered to see links

;

 

[Jonae]

Re: [Release] MU Connect Server_v1.0.9.920 © S@nek[BoR]

data//lang//kor or jpn or what you use//commonloc.cfg

[ConnectServerInfo]
IP      = 127.0.0.1
PORT	= 55557

it should have this lines,if all is ok than check the firewall to see if port is blocked,if it is than allow it for local access(private access in win2k8 firewall).

PS: better check all kor,jpn,chs,vtm folder because gs may be customized and you don't know exactly folder!

i can't make it work, i checked all settings and nothing. Firewall port is open. Maybe is another port?

 

[thenetwhw]

Re: [Release] MU Connect Server_v1.0.9.920 © S@nek[BoR]

I Also cant make it show server list to Players , Using Protocol = 1 .
I have set UDPListen to 127.0.0.1 , tryed also 192.168.0.1
On GS i set
///
IP = 192.168.0.1 ( CS / JS IP )
PORT = 55557

It shows Join Server Online, and also GameServer Online, but player get disconnect message when conencting...

Can you help ?

 

[Jonae]

Re: [Release] MU Connect Server_v1.0.9.920 © S@nek[BoR]

I Also cant make it show server list to Players , Using Protocol = 1 .
I have set UDPListen to 127.0.0.1 , tryed also 192.168.0.1
On GS i set
///
IP = 192.168.0.1 ( CS / JS IP )
PORT = 55557

It shows Join Server Online, and also GameServer Online, but player get disconnect message when conencting...

Can you help ?

Check "ProtocolMode" and "FilterMode".

 

[thenetwhw]

Re: [Release] MU Connect Server_v1.0.9.920 © S@nek[BoR]

Could this be join server issue ? may be my join server is not compatible with this CS ?

---------- Post added at 01:11 PM ---------- Previous post was at 01:10 PM ----------

What should i look for on FilterMode ?
and protocol i choose the same as my original CS .97

--
Player dont GET disconnected message.. It just dont show server list...

All setting are OK, CS getting statistcs from GameServer like 0/200 , but server list doesnt show !

 

[Jonae]

Re: [Release] MU Connect Server_v1.0.9.920 © S@nek[BoR]

Could this be join server issue ? may be my join server is not compatible with this CS ?

---------- Post added at 01:11 PM ---------- Previous post was at 01:10 PM ----------

What should i look for on FilterMode ?
and protocol i choose the same as my original CS .97

--
Player dont GET disconnected message.. It just dont show server list...

All setting are OK, CS getting statistcs from GameServer like 0/200 , but server list doesnt show !

If you can't see the servers it means you have bad configs, check again the settings.

 

[=Ady=]

Re: [Release] MU Connect Server_v1.0.9.920 © S@nek[BoR]

if the FTP address is not correct, launcher won't start the game ...

Can t you make same engine like webzen connect server ? Even if ftp is down or leave empty on FTP fields so we can connect to server?

 

[Flore_ncia]

Re: [Release] MU Connect Server_v1.0.9.920 © S@nek[BoR]

After update to 1.0.9.1000, each 8 hours i need to reset the ConnectServer.
I dont use the autoupdate option, but never have problemas before.

-- Physical Memory: 8960 KByte
-- Virtual Memory: 7376 KByte
[13:14:53] The client sent the wrong package; IP-Address: 201.212.124.19
[13:17:05] Timed out waiting for action. It took 54 seconds. Client is disconnect; IP-Address: 201.212.124.19
[13:18:05] Timed out waiting for action. It took 49 seconds. Client is disconnect; IP-Address: 201.212.124.19
[13:18:05] Timed out waiting for action. It took 27 seconds. Client is disconnect; IP-Address: 201.212.124.19
[13:18:05] Timed out waiting for action. It took 60 seconds. Client is disconnect; IP-Address: 201.212.124.19
[13:18:12] Information about the process:
-- Physical Memory: 10176 KByte; (Default: 8960 KByte)
-- Virtual Memory: 8948 KByte; (Default: 7376 KByte)
-- Total Time: 00 days 00:04:09
[13:18:12] Removing IOCP object. In the process...
[13:18:13] [TTCPContext->RemoveIOPortAndThreads] Completion of 4 working threads IOCP system.
[13:18:13] [TTCPContext->RemoveIOPortAndThreads] The successful closure of the handle IOCP.
[13:18:13] Remove items from the list. In the process...
[13:18:13] Remove items from the list is complete.
[13:18:13] Removing object IOCP completed.
[13:18:13] Removing UDP object. In the process...
[13:18:13] Removing object UDP completed.
[13:18:13] ### ========== Version: 1.0.9.1000 ========== ###
[13:18:13] ### ========== End logs: 16:11:2009 ========== ###

then i need to close the program and restart for ConnectServer works

 

[t4ykon]

Re: [Release] MU Connect Server_v1.0.9.920 © S@nek[BoR]

here shows the joinserver offline and also does not show the total player connected either version 97d +99 i configured correctly out, what can be?

 

[thenetwhw]

Re: [Release] MU Connect Server_v1.0.9.920 © S@nek[BoR]

This connect server on latest version rocks... Works like a charm on newer versions protocol 20050502. But i cant make it work on older protocols... Just dont work !

 

[codingvn]

Fantastic release, however, there is a new bug in auto update function

If I set

[GameServerInfo]
ClientVersion=1.06.35
VersionFileName=version.wvd

The BOR CS will understand that is 1.6.35 thus I cannot update it from my old version file.

Please update this bug. Thanks BOR Team

 

[EiniuX]

NON STABLE!!!
after some time players can`t connect. version : 97d

 

[darkdemon89]

does this fix the error where the connect server will not allow people to join in GS after a few hours if the server is running on Win Server 2k3 sp2?