Problem <><> Cannot connect<><>

[walkernight88]

Hy RaGEZONE

I have a problem with my server ... i downloaded the CentOS-4.7 ready in-built with Cabal Server ... but i cant connect on my server ... I use a ENGLISH Client ...

I modified the ip for CentOs-4.7 ...

And here says the server works ...

And here ... my internal and server list ...

<walkernight88> with respect :8:

 

[elmaster]

run ipconfig and show the result.
you connection to wan is in bridge or route?

 

[walkernight88]

My connectiong is bridge ... i tryed to ping CentOs-4.7 but here are the results ...

P.S. = It says timed out ... i cant ping CentOs-4.7 IP ... :|


Who can help me please add me om Y!M (walkernight88) or Skype (walkernight88) [sorry if i made a mistake of putting the ID on the thread ... ]

<walkernight88> with respect

 

[cypher]

I should have watched my mouth and not said/talked shit to DeadlyData telling him things like your are not welcome here because then I become the one who is truly not welcome here.

 

[walkernight88]

are you using a router.
also try redownloading ogplanet client and apply saur0n`s patch

Don`t understand ... "are you using a router." ... what means ... i don`t use any router ... i got my internet connection direct broadband...

EDIT:
I downloaded the OgPlanet client ... i configured it with saur0ns patch ... still don`t work ... :|:|:|

<walkernight88> with respect ...

 

[cypher]

I should have watched my mouth and not said/talked shit to DeadlyData telling him things like your are not welcome here because then I become the one who is truly not welcome here.

 

[donor]

1.Cancle Brigde Network (VMWare 6.5 Workstation)
2.Use Direct to physical ethernet instead by
- go to edit -> Virtual Network Editor-- Host Virtual Network Mapping
- Change First Line (VMnet0 from Bridged to an automatically chosen adapter to Name of Physical Landcard (my computer It's "NVIDIA nForce Networking Controller - Packet Scheduler Miniport)

Finish VMware Config

3. then go to CentOS-4.7
- Double Click Network Adapter and choose "Custom Specific virtual network" and choose "VMnet0 (default Brided) then click OK

finish CentOS-4.7 network config

4. go to My Network Places on Windows XP
- Disable VMware Network Adapter WMnet1 and VMware Network Adapter WMnet1

finish all

5. then Start your CentOS-4.7 in VMWare

- setup IP Like Computer IN your LAN Network
xsample --

My net work at my home (ADSL 4MB) Router is LinkSYS WAG54G V3

Router IP = 192.168.0.2
WIndows XP IP = 192.168.0.10
SUBNET MASK = 255.255.255.0


My CentOS-4.7 in VMWare eth0 IP = 192.168.0.101
My CentOS-4.7 in VMWare eth0 Gateway = 192.168.0.2
My CentOS-4.7 in VMWare eth0 Subnet Mask = 255.255.255.0
My CentOS-4.7 in VMWare eth0 DNS Server = 192.168.0.2 (same as gateway)

when finish Need Restart CentOS-4.7 Again


- test Ping to yourself It's OK
- then Ping to your Windows XP IP It's OK
- then Ping to Others LAN computer It's OK
- then Ping to mail.yahoo.com It's OK

- Last test Ping from Other Computer to your CentOS4.7 IP It's OK

Congretulation Now Your Done All

I'm not teach about Router Port Forwarader It's much more topic in RZ talk about this

 

[donor]

Correct Missing

EDIT

4. go to My Network Places on Windows XP
- Disable VMware Network Adapter WMnet1 and VMware Network Adapter WMnet1

to

4. go to My Network Places on Windows XP
- Disable VMware Network Adapter WMnet1 and VMware Network Adapter WMnet8