- Joined
- Feb 11, 2008
- Messages
- 4
- Reaction score
- 0
I've been seeing alot of people complaining about how to remote MuMake aka MuEditor but they just can't seem to find the right guide. So today I am going to teach those people how to remote MuMaker. This step by step guide will contain both words and screenshots for you all to use and enjoy. Shall we begin?
MuMaker
Step 1: First you will have to download MuMaker from the link(s) provided above.
Step 2: Once you have chosen the link you want to download MuMaker from you must save MuMaker.rar into you Desktop for fast access. To do so you click on the Download button and a window will pop up. Click Save and click Desktop, then click Save again.
This is what it should look like while you are waiting for it to download.
Step 3: When your download is complete, go to your desktop and look for MuMaker.rar. Right click on it and click Extract Here.
This is what it should look like while it's extracting.
Step 4: Once MuMaker.rar is done extracting you will see a new folder on your Desktop called MuMaker.
This is what the inside of your folder should look like.
Once you have opened your folder launch MuMaker.
Step 5: Once you have launched MuMaker let it load across your screen. It should look like this.
After it's done loading this is what you should get.
Step 6:
Once everything is all loaded up click on Config near the top right corner of MuMaker.
Step 7: Now we are almost done, but this is the most important part of configuring your MuMaker. When you press Config you should see something like this.
Key
1) Enter the server's name here
2) Enter your server's SQL User Name
3) Enter your server's SQL Password
4) If you are using MuMaker on the same computer you built it on check Local if you're remoting check Remote
5) Enter your server's IP Address (Put in your Global Wan IP if you're using a router)
6) If you are using MD5 check MD5
7) Leave it as it is
8) Leave it as it is
9) Leave it as it is
10) If your server is using more then 1 Vault then check Extra WareHouse and the numbers of banks you have
11) Make sure the check box by Reset System is checked other wise do not change anything there
12) Select your language
13) Pick your server's version
14) Leave as it is
Step 8: To make sure your remote editor works correctly you must open ports 1433 TCP/UPD
This is the end of my guide I hope this helps. If you have any questions please feel free to ask.
Credits
TMT - SoftWare
MuMaker
To view the content, you need to sign in or register
Step 1: First you will have to download MuMaker from the link(s) provided above.
Step 2: Once you have chosen the link you want to download MuMaker from you must save MuMaker.rar into you Desktop for fast access. To do so you click on the Download button and a window will pop up. Click Save and click Desktop, then click Save again.
This is what it should look like while you are waiting for it to download.
Step 3: When your download is complete, go to your desktop and look for MuMaker.rar. Right click on it and click Extract Here.
This is what it should look like while it's extracting.
Step 4: Once MuMaker.rar is done extracting you will see a new folder on your Desktop called MuMaker.
This is what the inside of your folder should look like.
Once you have opened your folder launch MuMaker.
Step 5: Once you have launched MuMaker let it load across your screen. It should look like this.
After it's done loading this is what you should get.
Step 6:
Once everything is all loaded up click on Config near the top right corner of MuMaker.
Step 7: Now we are almost done, but this is the most important part of configuring your MuMaker. When you press Config you should see something like this.
Key
1) Enter the server's name here
2) Enter your server's SQL User Name
3) Enter your server's SQL Password
4) If you are using MuMaker on the same computer you built it on check Local if you're remoting check Remote
5) Enter your server's IP Address (Put in your Global Wan IP if you're using a router)
6) If you are using MD5 check MD5
7) Leave it as it is
8) Leave it as it is
9) Leave it as it is
10) If your server is using more then 1 Vault then check Extra WareHouse and the numbers of banks you have
11) Make sure the check box by Reset System is checked other wise do not change anything there
12) Select your language
13) Pick your server's version
14) Leave as it is
Step 8: To make sure your remote editor works correctly you must open ports 1433 TCP/UPD
This is the end of my guide I hope this helps. If you have any questions please feel free to ask.
Credits
TMT - SoftWare
