[Tut]Setting Up the Microsoft Loopback Adapter [XP] [Updated] - Innovative

[Innovative]

These series guides were written for:

To view the content, you need to sign in or register

[inix]™ Services 2.0 & Innovatives Mega Guide Thread!

Setting up the Microsoft Loopback Adapter on XP

This guide is for XP users, there is a slightly different method of installing the adapter
-Step One- Go to you "Control Panel"
If it is in "Simple View", change it to "Category View".
Then go to "Printers and Other Hardware"

-Step Two- On the left hand side, there should be a link named "Add Hardware"
Select it.
Click "Next" and let it search.

Select "Yes, I have already connected the hardware"
Press "Next".

Scroll down to the bottom and select "Add a new hardware device"
Press "Next"

Select "Install the hardware that I manually select from a list (Advanced)"
Press "Next"

Select "Network Adapters"
Press "Next"

Under "Manufacturer" select "Microsoft"
Under "Network Adapter" select "Microsoft Loopback Adapter"
Press "Next" and "Next" again to start installing.

-Step Three- Go to your desktop, right click and go to:
"New > Shortcut"
In the box prompt type "cmd" and press enter twice.
Double click the icon that you have just made, it should pop-up with a black box.
In the black box type "ipconfig" - Write all of these values and numbers down on a piece of paper somewhere.

-Step Four- After installation you need to configure the network.
Go to:
"Control Panel > Network and Internet Connections > Network Connections"

Select and right click the newly made Network and select "Properties".
Highlight "Internet Protocol (TCP/IP)" and press "Properties".
Select "Use the following IP address" and fill in your information.
Except for your IP Address, where you would use your WAN IP.

After doing so, press okay and now you should be able to connect to yourself!

Enjoy!

 

[leggykid]

Re: [Guide]Setting Up the Microsoft Loopback Adapter [XP] [Updated] - Innovative

nice job this really helped
as have alot of your TUT's
I now have a smoothly running Private server
double thumbs up man

 

[YoshiFan]

Re: [Guide]Setting Up the Microsoft Loopback Adapter [XP] [Updated] - Innovative

Thanks, Chris. All of your guides have helped me out so much now (and in the past). You can also just go to run and type command, by the way.

 

[xSaUMaNx]

Re: [Guide]Setting Up the Microsoft Loopback Adapter [XP] [Updated] - Innovative

U need the disk? cos i dont hav and it says i need it

 

[xxandycxx]

Re: [Guide]Setting Up the Microsoft Loopback Adapter [XP] [Updated] - Innovative

U need the disk? cos i dont hav and it says i need it

No, you do not need the disk, follow the setup closer, Its really easy if you read it right.

 

[brandonspeed200]

Re: [Guide]Setting Up the Microsoft Loopback Adapter [XP] [Updated] - Innovative

question, do you do this on the computer you are connecting from, or the server, or both? and is Default Gateway actually the Default Gateway in ipconfig, or the physical address of the NIC you are connecting to? thanks

 

[CarterFTWWW]

Re: [Guide]Setting Up the Microsoft Loopback Adapter [XP] [Updated] - Innovative

Revived a 2month old thread..

 

[brandonspeed200]

Re: [Guide]Setting Up the Microsoft Loopback Adapter [XP] [Updated] - Innovative

well some people just made a private server, so they just starting having the problems

 

[Popozow1012]

Re: [Guide]Setting Up the Microsoft Loopback Adapter [XP] [Updated] - Innovative

uhh i apparently dont have the program Prunteres and Other hardware how do i get it???

 

[Darkstanx]

Re: [Guide]Setting Up the Microsoft Loopback Adapter [XP] [Updated] - Innovative

The other PC in my LAN can't get into the game... only the PC server, tx to this post, but LANs can't. How can i fix it?

 

[ihatehaxor]

Re: [Guide]Setting Up the Microsoft Loopback Adapter [XP] [Updated] - Innovative

uhh i apparently dont have the program Prunteres and Other hardware how do i get it???

all computers have it..

 

[fiinix00]

TYTYTYTTY FINALY got this loopback adaptor to work... the external in the "ip address"

 

[badboy_style]

thank you mannnnnnnnnnnnnnnnnnnnnn

 

[yingrox]

What exactly does this do?
Does it make it so you dont have to portfoward or hwat?

 

[Rampenbram]

This Tut helped me out!!
Ty

 

[ShesInMyPants]

What exactly does this do?
Does it make it so you dont have to portfoward or hwat?

Not sure but i think if loopback is so people can connect to your client.