[Aion 2.7-3.5] Dwarfpickers Easy MultiCoreEmu Repack 0.1.0 [Discussion Thread]

[Sataniceaden]

Well i have had no luck with the quest tracker at all
the only thing i can think of is that it is my bin32 folder the reason for this is i am currently running NCSOFT official client updated monday

and i have only replaced the Bin32 folder and the \data\items from "Aion.3.5.0.2.Patch 10.Nov" linked in this forum

so im guessing its either these files i will know by tomorrow as im downloading the game-forge live client again and hoping that if i replace the L10N from the official NCSOFT client that it will allow me to run it

other than that i will have to look at compiling a non Celestial server and confirming 100% if it is the server files or not.

Regards
Sataniceaden

 

[osakof]

how fix these problem

You must be registered to see links

 

[hightech1406]

Re: [Aion 2.7-3.5] Dwarfpickers Easy MultiCoreEmu Repack 0.1.0

aion folder not found or unsupported language how to fix this please..

i admitted I am new here^^
above post was now ok..

here is my new problem..

cannot connect to the authorization server...

please help me

 

[unspokenevil]

Re: [Aion 2.7-3.5] Dwarfpickers Easy MultiCoreEmu Repack 0.1.0

@hightech1406
Did you place the "Disable login IP check fix" file in your aion/bin32 folder?

 

[Choy Astig]

little sneak peak:

Any updates for this? :

 

[Dwarfpicker]

will be released when rdy!

 

[Choy Astig]

will be released when rdy!

Good to hear that from ya dwarf cuz someone told be that'll be a closed source. (fingers crossed)

 

[hightech1406]

Re: [Aion 2.7-3.5] Dwarfpickers Easy MultiCoreEmu Repack 0.1.0

and now it works very well,

thanks..but do you know how to fix my server for me to play aion LAN..??coz i cant figure it out

 

[unspokenevil]

Re: [Aion 2.7-3.5] Dwarfpickers Easy MultiCoreEmu Repack 0.1.0

@hightech1406
you need to edit the ipconfig.xml file, its located in the config folder of the gameserver folder. You need to change the ipconfig default="127.0.0.1" to your router's ip address.

example
<ipconfig default="192.168.0.1>

Then you also need to change your launcher bat file to your router's ip address.

 

[Choy Astig]

Re: [Aion 2.7-3.5] Dwarfpickers Easy MultiCoreEmu Repack 0.1.0

and now it works very well,

thanks..but do you know how to fix my server for me to play aion LAN..??coz i cant figure it out

I think we're dealing with the same issue.

I can connect with my server and other people too using my external IP.

But my other PC on LAN won't. Is there anyone in here who can help us sort this out?

 

[hightech1406]

Re: [Aion 2.7-3.5] Dwarfpickers Easy MultiCoreEmu Repack 0.1.0

that is my problem too..

anyone can help us..

i can only use 127.0.0.1 aion start bat..and my ipconfig is my WAN IP

but when i try to use 112.blah,blah,blah on aion start.bat it says cannot connect to the authorization server

 

[crustyclown71]

You have only change the 127.0.0.1 IP in the ipconfig.xml to your WAN IP and open the Ports 7777, 2106 and 9014 in the Firewall.
The Password in SQL Table "Servers" has to be the same than the Password in the "default.config" in the Gameserverside Configuration:
# LoginServer password for this GameServer
gameserver.network.login.password = PASSWORD
And the CC (CountryCode) you use.

 

[ferrin]

Good to hear that from ya dwarf cuz someone told be that'll be a closed source. (fingers crossed)

Dwarf's "repack" will never be "closed source" because that really doesn't make sense.
Im sure he will include whatever projects he can when he does release it, but
some projects have indeed gone closed source.
I have no idea what they feel gives them the right to do so honestly...
I mean they are all building their core off of the work of hundreds of people before them.
So, for them to say that it's all "their" work is complete crap.

 

[unspokenevil]

@ferrin I agree with you. I've notice, while looking through the files, that a lot of files are from previous open source releases.

 

[r0ck7y]

@Sataniceaden
try to use one of those am not sure but it fixed a friend of mine problem:

You must be registered to see links

another way :

You must be registered to see links

credits:
@NoScrubs aion & @ conquest aion

 

[shiori]

Anyone know how to get the webshop working for celestial? Or how to access it in game?

 

[goshotoni]

Even if you get the webshop working, you cant use .exchangetoll command, cuz it is missing.

 

[Choy Astig]

You have only change the 127.0.0.1 IP in the ipconfig.xml to your WAN IP and open the Ports 7777, 2106 and 9014 in the Firewall.
The Password in SQL Table "Servers" has to be the same than the Password in the "default.config" in the Gameserverside Configuration:
# LoginServer password for this GameServer
gameserver.network.login.password = PASSWORD
And the CC (CountryCode) you use.

"You have only change the 127.0.0.1 IP in the ipconfig.xml to your WAN IP"

If I'll do the sentence i qouted above will the people outside my LAN that connects through my external IP will still be able to connect in the server? Ty ahead

This is how I set my IPconfig.xml

<ipconfig default="(www.whatismyip.com)">
<iprange min="10.0.0.0" max="10.255.255.255" address="10.0.0.0"/>
<iprange min="172.16.0.0" max="172.31.255.255" address="172.16.0.0"/>
<iprange min="192.168.1.0" max="192.168.255.255" address="192.168.1.0"/>
<iprange min="127.0.0.1" max="127.0.255.255" address="127.0.0.1"/>
</ipconfig>

 

[hightech1406]

dwarfpicker can connect to WAN IP of my private server and my problem is that I cannot connect my LAN computers into my SERVER PC im using a router..

here is my ipconfig.xml

<ipconfig default="112.bla.bla.bla">
<iprange min="112.203.0.0" max="112.203.255.255" address="112.bla.bla.bla"/>
<iprange min="10.0.0.0" max="10.255.255.255" address="10.0.0.0"/>
<iprange min="172.16.0.0" max="172.31.255.255" address="172.16.0.0"/>
<iprange min="192.168.1.0" max="192.168.255.255" address="192.168.1.0"/>
<iprange min="127.0.0.1" max="127.0.255.255" address="127.0.0.1"/>
</ipconfig>

please help me!!!

screenshots?

sorry icant figure it out like that...

 

[descool]

if u wan to use public server for user connect to your server ,all port must be open at your Reuter at
Virtual Server or Forward(7777,2106,9014) .

<ipconfig default="175.140.1.XXX"> <---This my Public ip now

Here my ipconfig.xml :

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>

<!--
This script will build the U3J Project for Aion:

This program is free software: you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free Software
Foundation, either version 3 of the License, or (at your option) any later
version.

This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
details.

You should have received a copy of the GNU General Public License along with
this program. If not, see "http://www.gnu.org/licenses"
-->

<!--
File that is responsible for network address mapping.
We can have any number of ip ranges mapped to various network interfaces
Useful for those who run server in local areas with two (or more) networks

For ipconfig's "default" attribute both DNS and ip address is supported.
Example: <ipconfig default="216.239.59.104"> = your Internet IP Adress (WAN-IP)
Examples: <ipconfig default="127.0.0.1"> for Local use, modify your C:\Windows\System32\drivers\etc\hosts to: 127.0.0.1 localhost
Examples: <ipconfig default="192.168.2.xx"> for Local use, modify your C:\Windows\System32\drivers\etc\hosts to: 192.168.2.xx localhost
Examples: <ipconfig default="192.168.2.xx"> for DNS Hosting (yourhost.NO-IP.com) use, modify your C:\Windows\System32\drivers\etc\hosts to: 192.168.2.xx yourhost.no-ip.com (loop-back)
<iprange min="192.168.0.0" max="192.168.255.255" address="192.168.0.20"/> // where (192.168.0.20 = your Local IP Adress
<iprange min="192.168.0.0" max="192.168.255.255" address="192.168.2.20"/>
-->

<ipconfig default="175.140.1.XXX">

<!--
IANA-reserved private IPv4 network ranges
Access only from local networks, external client can't have any of
the following ip addresses
-->
<iprange min="10.0.0.0" max="10.255.255.255" address="10.0.0.0"/>
<iprange min="172.16.0.0" max="172.31.255.255" address="172.16.0.0"/>
<iprange min="192.168.0.0" max="192.168.255.255" address="192.168.0.0"/>

</ipconfig>