Bless Server files & VM

[hexcode]

it works in local,,,but not working in Public...i guess need to open some ports in the router...

You need to redirect ports 9900, 9993, 9998, 9980, 9800 (TCP/UDP) not sure about 9800.
If you have more that one NIC on your PC you need to change priority to the NIC that is connected to to your router or disable other adapters until you start the server.
Regards

Spoiler: Change NIC priority

Setting Network Priority for Windows​

Windows 10 and Windows Server 2012 and Higher​

For Windows 10 and Windows Server 2012 and higher, you need to set the priority per adapter using "Interface metric". Adapters with a lower InterfaceMetric number are prioritized over adapters that have a higher number.

1. Open Network Connections.
2. Go to each adapter and click on Properties.
3. Click on IPv4 and click on Properties again in the new window.
4. Click on Advanced.
5. Change to a value of 2 or higher, as 1 is reserved for the loopback adapter.

If you prefer Powershell, you can run the following:

1. Open a new elevated PowerShell prompt.
2. Run the command Get-NetIPInterface.
3. Find your Ethernet adapters in the list and look at the InterfaceMetric and Index column. Make note of index and InterfaceMetric value of the adapter you want to change.
4. Run the command Set-NetIPInterface -InterfaceIndex "indexValue" -InterfaceMetric "metricValue" where indexValue is the index of the adapter and metricValue is the InterfaceMetric value you want to set. For example, Set-NetIPInterface -InterfaceIndex "11" -InterfaceMetric "20" would set adapter 11’s Interface Metric to 20.

Regards

 

[fitnessguy0]

You need to redirect ports 9900, 9993, 9998, 9980, 9800 (TCP/UDP) not sure about 9800.
If you have more that one NIC on your PC you need to change priority to the NIC that is connected to to your router or disable other adapters until you start the server.
Regards

Spoiler: Change NIC priority

Setting Network Priority for Windows​

Windows 10 and Windows Server 2012 and Higher​

For Windows 10 and Windows Server 2012 and higher, you need to set the priority per adapter using "Interface metric". Adapters with a lower InterfaceMetric number are prioritized over adapters that have a higher number.

1. Open Network Connections.
2. Go to each adapter and click on Properties.
3. Click on IPv4 and click on Properties again in the new window.
4. Click on Advanced.
5. Change to a value of 2 or higher, as 1 is reserved for the loopback adapter.

If you prefer Powershell, you can run the following:

1. Open a new elevated PowerShell prompt.
2. Run the command Get-NetIPInterface.
3. Find your Ethernet adapters in the list and look at the InterfaceMetric and Index column. Make note of index and InterfaceMetric value of the adapter you want to change.
4. Run the command Set-NetIPInterface -InterfaceIndex "indexValue" -InterfaceMetric "metricValue" where indexValue is the index of the adapter and metricValue is the InterfaceMetric value you want to set. For example, Set-NetIPInterface -InterfaceIndex "11" -InterfaceMetric "20" would set adapter 11’s Interface Metric to 20.

Regards

thx....1 more question...

I wonder where to edit killing monsters' expereice? thanks

 

[papka]

D:\BlessServer\BLServer\Content\ServerData\NPCInfo

Example


bl:exp_acquired="187" bl:skill_exp_acquired="0" bl:drop_money="58" bl:drop_money_ratio="100"

Change EXP/Money/Skill EXP in all files.

 

[hexcode]

D:\BlessServer\BLServer\Content\ServerData\NPCInfo

Example


bl:exp_acquired="187" bl:skill_exp_acquired="0" bl:drop_money="58" bl:drop_money_ratio="100"

Change EXP/Money/Skill EXP in all files.

I will add and one more file to check NPCBalanceInfo.xml

<bl:npcBalanceInfo bl:balance_id="40001209" bl:code_name="Elite_Siren_J10_Balance_Lv39" bl:npc_grade="Elite" bl:gear_score="1276" bl:level="39" bl:hp_regen_period="1" bl:mp_regen_period="1" bl:exp_acquired="10386" bl:skill_exp_acquired="0" bl:drop_money="0" bl:drop_money_ratio="0" bl:drop_money_range="0" bl:min_drop_table="0" bl:min_drop_table_personal="0" bl:level_scaling_id="Elite_Siren_J10_Balance" bl:level_scaling_max_level="0" bl:level_scaling_offset="-5" bl:balance_group="J10" bl:event_drop="world_drop_treasure_piece_J10_elite world_drop_treasure_piece_J10_elite_inc_10% world_drop_treasure_piece_J10_elite_inc_20% world_drop_treasure_piece_J10_elite_inc_30% world_drop_treasure_piece_J10_elite_inc_40% world_drop_treasure_piece_J10_elite_inc_50% world_drop_treasure_piece_J10_elite_inc_60% world_drop_treasure_piece_J10_elite_inc_70% world_drop_treasure_piece_J10_elite_inc_80% world_drop_treasure_piece_J10_elite_inc_90% world_drop_treasure_piece_J10_elite_inc_100% world_drop_potion_recipe_elite world_drop_potion_recipe_elite_200% world_drop_hometown_recipe_elite world_drop_hometown_recipe_elite_200% world_drop_hometown_worker_elite world_drop_hometown_worker_elite_200% world_drop_hometown_townplan_elite world_drop_hometown_townplan_elite_200% world_drop_rare_treasure_piece preset_event_breath_drop_03 world_drop_ancient_weapon_key_item world_drop_ancient_weapon_ancient_book elite_material_drop_13 elite_material_drop_13_inc_100%" bl:npc_hp_scaling_id="Elite_Default" bl:dimension_balance_id="nil">

Regards

 

[fitnessguy0]

I will add and one more file to check NPCBalanceInfo.xml


Regards

what is this file used for? and how much rate of this setting? exp_acquired="10386"

I will add and one more file to check NPCBalanceInfo.xml


Regards

Ai cannot load the word server after i added ur file

 

[hexcode]

Hello guys, because is hard to find all server bugs and issues of this files, we decided to start a test server and test with friends. All bugs will be listed in our

You must be registered to see links

.If some of you want to join in tests, please join to our

You must be registered to see links

.
Regards

 

[kasanostra]

Hello everyone, Does the auction house work in this version?

 

[dziobus]

Hello everyone, Does the auction house work in this version?

The player market? Yes it should, its been a while since I tried.

 

[papka]

Hello everyone, Does the auction house work in this version?

Not work:

Lumena and Lumena shop.
Have only china API for register account (but have backdoor)

For fix lumena you must find retail api or rewrite it.

 

[kasanostra]

Not work:

Lumena and Lumena shop.
Have only china API for register account (but have backdoor)

For fix lumena you must find retail api or rewrite it.

But the usual marketplace for players in the game, I understand that it works? as dziubas wrote. The Lumena store itself I doubt that it can be done and for the one who will do it and will be able to do it, he will rather not share it

One more question, do you also have this error? It looks like the connection is getting wrong data and time?

 

[MentaL]

What is the status of the files in terms of progression and workability? I am considering a dedicated section.

 

[papka]

What is the status of the files in terms of progression and workability? I am considering a dedicated section.

90% workable, you can setup and play without any problem.

 

[MentaL]

90% workable, you can setup and play without any problem.

What are the main limitations.

 

[papka]

Cash shop not work, password problem like vindicuts. But you can rewrite our api and fix this issue.

@MentaL

 

[MentaL]

I will make a section and hope it'll spur on some development and fixes. Dad duties first and when she is a sleep, I will make the section.

 

[papka]

I will make a section and hope it'll spur on some development and fixes. Dad duties first and when she is a sleep, I will make the section.

If you make section i can make some tutorial for setup it without vm, fix some issue, etc.

 

[kasanostra]

I will make a section and hope it'll spur on some development and fixes. Dad duties first and when she is a sleep, I will make the section.

I think it's worth the game has a lot of potential and data to the server flow out from time to time. But without a separate section it will rather die a death of natural oblivion

 

[MentaL]

If you make section i can make some tutorial for setup it without vm, fix some issue, etc.

It'll have the base mmo dev structure. Better start prepping
###
Section is now live.
###
Looking to hire ONE single moderator for this section. The application section is here:

Moderator Applications

Believe you have what it takes to join the RaGEZONE team? Share your application here.

forum.ragezone.com

Requirements;

- at least a year membership
- decent post count
- knowledge of the game
- friendly attitude
- over the age of 18
- no hidden or secondary accounts

Thanks.

 

[Robyson]

Yes, this one has good potential, the solution for the lack of AVX2
on older processors can also be included in the tutorial.

Bless Server files & VM

1)Put the launcher from the Desktop VM in the game client folder where you find the .bat... 2)I'm lazy...I use the already configured GM account... 3)You can change the language of the game..In game...Language...as said by argeus99...

forum.ragezone.com

 

[MentaL]

Looking to hire ONE single moderator for this section. The application section is here:

Moderator Applications

Believe you have what it takes to join the RaGEZONE team? Share your application here.

forum.ragezone.com

Requirements;

- at least a year membership
- decent post count
- knowledge of the game
- friendly attitude
- over the age of 18
- no hidden or secondary accounts

Thanks.