Router Guide

[thamtuhy]

to Shadowjumper!

To shadowjumper!!!
Config muserver play on lan+wan with route Zyxel ADSL:

On your route web config ( as your screen short), click Nat
then click Detail (use SUA only)
add these port:
Star port End port ip address
80 80 your muserver ip ( ex: 192.168.1.10)
44405 44405 your muserver ip
55557 55557 your muserver ip
55901 55901 your muserver ip
55960 55962 your muserver ip
55970 55971 your muserver ip
Click save then apply
To turn on ip nat loopback :
start------>run: telnet your route lan ip ( ex: 192.168.1.1)
log in
go to menu 24/8 ( command)
==> ras>_
type: ip nat loopback on
enter
log out
Done
This is route part. To config ip on muserver file please read first post
All clients ( lan+wan) use global ip or host registed to use dynamic ip
PS: Hope this post can helf. I just try to post with my very poor english. Please forgive me if i make mistake. By the way, i'm vietnamese. You can mail me by address:
[email protected].
Thanks!

 

[DrakhanValane]

Tried this, the dos promt closed on
start------>run: telnet your route lan ip ( ex: 192.168.1.1)

So i tried it in cmd, worked but couldnt connect because the port was closed, i will open the port and post my finds

 

[Kirara]

can anyone help me with my problem? i having been trying for days

 

[Shadowjumper]

Well, i got a new router and WAN works fine, but LAN not... Gotta find out how to do that. Anyone know how to?

 

[zerog]

how do i download the MSSQL Server i went to the site clkined on teh server and it led me here

To view the content, you need to sign in or register

and i cant fingure out how to donwload it form there also is it ok if i have ver 0.97b ?

 

[Boko]

To zerog:

First: Yes it is ok to have version 0.97b (I think)

Second: To download MSSQL, go to that link you posted. At the right side of the screen is a place where you have to select language. Select yours then press 'Go'

Greetings,
Boko

 

[zerog]

cool thanks i found itk ill try to folow your guide to make an mu server

ill proboly make erors so i will ask for help again lol

 

[AbelAyn]

Well, i got a new router and WAN works fine, but LAN not... Gotta find out how to do that. Anyone know how to?

I am also have this same problem i try with global ip and lan ip, Global ip just loads and says Disconnected, While LAN IP loads shows {Server** then the Connect button but when i press it i get disconnected does anyone know how to solve this problem, btw im using a Netgear RP614 Router with a 1500/256 ADSL line,


i know that people can connect because my brother and cousin can connect to it from my second dsl line


Sylph

 

[lnvert]

i get this error trying to add accounts, help :eh: ?

 

[BalRoG_fr]

damn this stupid router i did all u ppl told me 2
but still it wont work

 

[Boko]

To Invert:

You did something wrong in ODBC

Try again and do what is says

 

[thamtuhy]

I can play Wan+Lan with route zyxel ADSL. If you use zyxel route let follow my last post step to config route.
To Shadowjumper: which is new route you are using? tell me , may be i can help!!!

 

[DrakhanValane]

6. Once installation is finished go to control panel and select Networkconnections (Or something similar). Right click your Microsoft Loopback Adapter Connection, and select Properties. Select your Internet-protocol (TCP/IP) and click Properties.


Does the loop back device have to send and receive data ( double click it) to work? mine only sends.

 

[abusado]

6. Once installation is finished go to control panel and select Networkconnections (Or something similar). Right click your Microsoft Loopback Adapter Connection, and select Properties. Select your Internet-protocol (TCP/IP) and click Properties.

i did it.... but what shall i put in gateway?? i use 192.168.1.1 in LAN ...

 

[Boko]

To DrakhanValane: Mine only sends aswell, so it's no problem

 

[abusado]

OK the other CAFE's can connect to my server .... but the problem is i cant connect tru local network... whats the problem? Need Help BADLYNeed Help BADLYNeed Help BADLYNeed Help BADLY Pls I need HELP

 

[abusado]

OK the other CAFE's can connect to my server .... but the problem is i cant connect tru local network... whats the problem? Need Help BADLYNeed

So its only WAN no LAN


BTW my ROuTER is SUreCOM

 

[Boko]

All have this problem. The solution is to change some IP in your Server files to your LAN IP so ppl on Lan can enter, and once they've entered you change back those IP to WAN IP. I don't know exactly how it works, but it's on this forum somewhere. USE SEARCH!!!

 

[cr0ss]

abusado:

in your
C:\muserver\CS\data folder, click on ServerList.dat

type this in with your global ip being 0, and your router ip being 1. like this
//Server List

1 "Mu97" "192.168.1.1" 55901 "SHOW"
0 "Mu97" "65.34.251.39" 55901 "SHOW"

 

[tongtong]

Adding Accounts

1. In the Enterprise Manager go to Security and then Logins.

2. Right click "sa" and click Properties.

3. Set the password to anything you want (Remember the password though) and change the default Database to MuOnline.

4. Unzip your _mureg.zip file and load mureg.exe

5. Type in your username (sa) and your password (The password you entered just now in the Enterprise Manager).

6. Select the New Account Tab and create a new account.


I Have a problem there.. I cannot change the password.. After i change and go back, it goes back to the old one which i don't know what it is.. What to do?