Router Guide

[nesteroff]

i have no clue wat to do with the port fowarding it seems netgear is different to the others.

here is screenshot of the port fowarding set up of my router. wat do i do???

 

[[M]ichaeL]

ermm....??Why??

i keep on gettin D/C btw my router is linksys BEFW11s4 V.4 can you tell me why?? i have follow all the step.....


Connecting to your Server

There are several ways to connect to your Server, but the best thing is using a launcher (That's what I think):

1. Unzip the 0.96y client full in a new folder (Make one yourself)

2. Unzip the 0.97 patch in the same folder

3. Unzip the 0.97 english patch in Data/Local folder (In the folder you made)

4. Unzip the launcher in the folder you made (same folder as 0.96y and 0.97 patch)

5. Run launcher 2.exe. Name = Your Server Name, Host = Your Global IP, Version = 0.97 (Until you've updated the server of course), port = 44405


and step 1 to 5 i dun understand it....

 

[Axlan]

conecting global

Ok I got the server working fine with lan. I've changed all the settings to my WAN adress but I can still connect lan. My friends can ping the server and can see the 1 server, but when they click on it they get disconnected. Im pretty sure the problem is what is described as the loopback device. I set it up but unfortuneatly no one can connect when its on. I know the ports are foward because I set my router to DMZ for the comp. Is the Loopback device really necesary?

 

[ukphil2004]

i need help with Editing IP Address and Setting up Server Files
i cant open the files(.dat and cfg) so i cant do the ips help

2. Change all the ip addresses found in config files to the IP adress you see in

To view the content, you need to sign in or register

(this is your Global IP)
All Ip adresses in the following files must be changed to this Global IP Address:

C:\muserver\CS\Connectserverlist.dat
C:\muserver\CS\data\Connectserverlist.dat
C:\muserver\CS\data\ServerList.dat
C:\muserver\data\IpList.dat
*C:\muserver\data\lang\eng\commonloc.cfg
*C:\muserver\data\lang\kor\commonloc.cfg
*C:\muserver\data\lang\tai\commonloc.cfg
*C:\muserver\data\lang\chs\commonloc.cfg

 

[gamerman]

To view the content, you need to sign in or register

This is what i get every time i try login with the sa user and the password .... Can someone please help me ?

 

[Hybr!d]

Very Very good guide dude. Informative and straight to the point

 

[gamerman]

Hello
I have now set up everything but my router says this when i tried to add the following ports : * 44405 TCP(only got this to work)
(one every single port you see here except the one that i got worked i all get this msg when trying to apply the ports : Duplicate entry or entry conflicts with previous configuration :eh:
* 55557 UDP
* 55970 TCP
* 55971 TCP
* 55960 TCP
* 55961 TCP
* 55962 TCP
* 55557 TCP
* 55901 TCP

And i tried to lauch the main shortcut with connect/u My Ip / and the port But when i then got inn i just got a blank screen (just mu online ) not any server ... So it might be the Launcher.exe that i can`t download (becuase the link you provided is dead) or that i can`t open the ports....

Please Help Me Here Bounce8 :bounce8:

 

[Zerocould]

I need help
hi people!!!

I need a help, i folow al tutorial but the link 8 not work, all others links works fine but the link 8 dont work ic hier

please somebody help me

i search for other guids but dont find

 

[gamerman]

hmm this is what i get :

Just nothing.......probably because i only have 44405 port open , my ISP is fixing the rest of ports .......plz answer though if you know why i cant connect....

Btw i need launcher ..someone plz send me

edit: i just have the server running....not the inks in links

 

[gamerman]

Hello
i now got almost everything to work except the ports.........This pic show that it works but when i try the main shortcut with connect command in properties i only get resolution 1024x760 and it stays in that resolution without entering the actual mu....Please help me here and what does the kind of error mean in this pic :

I also need launcher ........Can i connect with my own connection or do i have to try with a friends comp ?

 

[gamerman]

Hello
I would like this to be taken in picture guide :

3. Go to Start -> Run and type in "cmd". It will load a command prompt. Type ipconfig /all in command prompt to check your ip adress (This is your Computer IP).

4. Change all Ip adresses in the following file (There are 3 IP adresses in this file) to your Computer IP: C:\muserver\data\commonserver.cfg

5. Change the IP Addresses found in 4.lnk and 8.lnk in the c:\muserver\Links folder(right click on them and select properties) to your Computer IP.

I dont understand what ip om suppose to choose....

 

[r1moza]

gamerman Hello
I have now set up everything but my router says this when i tried to add the following ports : * 44405 TCP(only got this to work)
(one every single port you see here except the one that i got worked i all get this msg when trying to apply the ports : Duplicate entry or entry conflicts with previous configuration
* 55557 UDP
* 55970 TCP
* 55971 TCP
* 55960 TCP
* 55961 TCP
* 55962 TCP
* 55557 TCP
* 55901 TCP

I know this it tells u this becouse u write the same ip 2 times which u have to
but ur router reads it as a dublicate which means u can forward only 1 port

 

[gamerman]

In other words i cant set up server ?

Il let my ISP take care of this opening i mean i should be able to forwarding ports with the router that came with the modem its like and router inside the modem that came when i order my broadband

 

[r1moza]

Find Out Your Router name and Version and search for it here. It Says exactly how to forward ports with pictures. Big variety of routers

 

[Zerocould]

I need help
hi people!!!

I need a help, i folow al tutorial but the link 8 not work, all others links works fine but the link 8 dont work ic hier

please somebody help me

i search for other guids but dont find

my eror has solution ??

bye

 

[joeds16]

Hello Zerocould!!

You've miss one of your ip address, check carefully all ip address that you edited before in your CS folder and Data folder and also in your Links 4 and 8 if they right...... If im not mistaken this error is in your commonserver.cfg , they're not match with your ip in link 8. Coz i'd solve that already when that error occur in my muserver.

Just double check ur ips, this guide is great!! If you follow this guide correctly i think you'll never have this error.

Hope this help you

 

[-ASH-]

hello, i've just one problem but i cant solve it.

I'm using MUserveur on a local serveur.

In lan, it wors perfectly, no problems but i don't know to make it on wan, i wana to play in lan with my brother and online too.

Help me, explain me please.

 

[ShadowWill]

Where can i download 99version of muserver?

 

[Skite]

Hi, When I get to the step of making a new account, I type in the password and hit enter it says:
Data source name not found and no default driver specified.

Can anyone help me out here?

 

[neophyte]

i can't add the ports :S