Tera level 100 version

[E8dsora 8D]

Ok, veo un montón de discrepancias con respecto a su captura de pantalla anterior (a continuación) de su configuración de red (que es la que está fuera de la máquina virtual)

¿Puede tomar una captura de pantalla de la configuración de hardware de la máquina virtual VMWare? -> adaptador de red? No estoy seguro de si está configurado en NAT porque la interfaz VMNet8 (desde fuera de la VM) muestra la red 192.168.200 como lo que se usaría para NAT.

La red 192.168.15 es su red wi-fi (esto está fuera de la máquina virtual). Sin embargo, ipconfig desde dentro de su máquina virtual muestra la dirección IP asignada a la máquina virtual como 10.10.10.128. [/ QUOTE]



Do you mean this section?

 

[Murasama]

¿Puede tomar una captura de pantalla de la configuración de hardware de la máquina virtual VMWare? -> adaptador de red? No estoy seguro de si está configurado en NAT porque la interfaz VMNet8 (desde fuera de la VM) muestra la red 192.168.200 como lo que se usaría para NAT.

La red 192.168.15 es su red wi-fi (esto está fuera de la máquina virtual). Sin embargo, ipconfig desde dentro de su máquina virtual muestra la dirección IP asignada a la máquina virtual como 10.10.10.128. [/ QUOTE]



Do you mean this section?

Yes, that's the one. It's NAT so it will be talking to the VMNet8 virtual interface. I think the IP address inside your virtual machine is the original static address. Can you double check the virtual machine to make sure the IP address is being obtained automatically via DHCP?

Settings -> Network & Internet -> Change adapter options

Right-click Ethernet0 and select Properties, click on Internet Protocol Version 4 (TCP/IP4) and click on the Properties button and make sure both are set to obtain automatically (see below)

If it is already this way (automatically obtain), then can you just double-check you have network connectivity from inside the virtual machine (just see if google.com loads). If that works, then see if you can ping 10.10.10.128 from outside the virtual machine.

If you needed to change the setting, then make sure to save the setting and re-run ipconfig again inside the virtual machine to see what IP address was assigned (for good measure, maybe reboot the virtual machine). You'll then want to change all of the prior 192.168.15.7 addresses to this one. Make sure to shutdown all of the running processes on the server (there's a batch file on the desktop that you can run); you'll need to close the tera-api command window.

 

[Dakado]

I am trying to change mob HP, so I can play dungeons solo but I struggle to indetify which ID is what in NpcData_X.xml files on server, and also I need to find where to edit instance matching, so it work for 2 players only for example so I can make 2 accounts and kill the dungeon solo (if I edit the HP).


I saw a link to a tool, that can unpack DataCenter file, but I cannot find it anymore, does anyone have it ? Will I find IDs that will corespond to Template id="1011" in NpcData_X.xml ?

It's a Spectral Tail idle growl sounds that are bugged not the footsteps, found them in "Monster_Voice21.gpk" under "trans_Wolf_unarmedwaitCue" Here is a gpk TMM mod that puts an empty ogg in the place of "trans_wolf_unarmedwait00_5.ogg".

Spectral Tail Fix (TMM):

To view the content, you need to sign in or register

I used "/@insert_item 256492 1" command to add the basic Spectral Tail (

To view the content, you need to sign in or register

)

Could you please share the entire file Monster_Voice21.gpk please ?

 

[dziobus]

I am trying to change mob HP, so I can play dungeons solo but I struggle to indetify which ID is what in NpcData_X.xml files on server, and also I need to find where to edit instance matching, so it work for 2 players only for example so I can make 2 accounts and kill the dungeon solo (if I edit the HP).


I saw a link to a tool, that can unpack DataCenter file, but I cannot find it anymore, does anyone have it ? Will I find IDs that will corespond to Template id="1011" in NpcData_X.xml ?






Could you please share the entire file Monster_Voice21.gpk please ?

You dont just need to change mob HP but also their attack and defense values, else you will still get essentially one-shot and not do much dmg to the mobs.
Here are tips from juniordark:
on StrSheet_Creature-00000.xml on DC search for the name of the monster you want to change, each monster is inside a <HuntingZone id="">, for example if I want to change Nightmare Fulminar
<String class="" name="Nightmare Fulminar" templateId="1002" gender="male" race="" title="Divine Nemesis" />
Nightmare Fulminar is in <HuntingZone id="454">, so you go to NpcData_454.xml on server and find the template with id "1002".
many of the attributes are outdated, so you would have to look at newer monsters and add attributes like physicalAttack="" physicalDefence="" magicalDefence=""
this also has to be modified in DC

For the spectral Tail, its a mod to fix it, the download link is the gpk file, but you need to use TMM else your client will not work.

From personal experience: changing the mob HP and stats is a pain because you cannot really balance it properly.
So what i did i created a secondary gear set with higher values for those dungeons, since its easier to make gear and try out than modify xml files.
Note also: You will not be able to do some dungeons as they require 5 party members to be present such as the door at bahaar's sanctum, or gossamer vault etc.


EDIT:
Seems Kelsaik Raid 10 and 20 man files and data are still there and can be enabled. Testing it server side, but i do not know what to add in the DC files for it. If someone could help out with that would be great.

 

[Dakado]

You dont just need to change mob HP but also their attack and defense values, else you will still get essentially one-shot and not do much dmg to the mobs.
Here are tips from juniordark:
on StrSheet_Creature-00000.xml on DC search for the name of the monster you want to change, each monster is inside a <HuntingZone id="">, for example if I want to change Nightmare Fulminar
<String class="" name="Nightmare Fulminar" templateId="1002" gender="male" race="" title="Divine Nemesis" />
Nightmare Fulminar is in <HuntingZone id="454">, so you go to NpcData_454.xml on server and find the template with id "1002".
many of the attributes are outdated, so you would have to look at newer monsters and add attributes like physicalAttack="" physicalDefence="" magicalDefence=""
this also has to be modified in DC

For the spectral Tail, its a mod to fix it, the download link is the gpk file, but you need to use TMM else your client will not work.

From personal experience: changing the mob HP and stats is a pain because you cannot really balance it properly.
So what i did i created a secondary gear set with higher values for those dungeons, since its easier to make gear and try out than modify xml files.
Note also: You will not be able to do some dungeons as they require 5 party members to be present such as the door at bahaar's sanctum, or gossamer vault etc.


EDIT:
Seems Kelsaik Raid 10 and 20 man files and data are still there and can be enabled. Testing it server side, but i do not know what to add in the DC files for it. If someone could help out with that would be great.

Thanks for the info! So there is no way to change the 5-player dungeons to only requiere for example 2 players ? And why is the NpcData outdated ? How it can work then if those mobs do not have defined some stats ?

I would really appareciate if you could point me in the right direction, how to add/modify some gear so I can do solo dungeons ?

 

[dziobus]

Thanks for the info! So there is no way to change the 5-player dungeons to only requiere for example 2 players ? And why is the NpcData outdated ? How it can work then if those mobs do not have defined some stats ?

I would really appareciate if you could point me in the right direction, how to add/modify some gear so I can do solo dungeons ?

You can change dungeons to require X amount of players, but some dungeons have specific mechanics that require 5 players. For example: Bahaars Sanctum Door inside the dungeon wont open unless 5 players are near it, Gossamer Vault Lasers wont stop and gate wont open unless 5 players are near the generator there.
(I dont remember the name but someone did post modified files for those for 92.03 but i do not know if those will work on 100.02. Have not checked those yet)

As far as stats go, bosses werent updated until a next cycled return of them was scheduled, thats how it always worked. Which is why a lot of the older ones dont have stats that were introduced.

For gear you have 2 ways to go about it:
1. You can change the stats on the actual gear in the XML files and update the attack values
2. You cna use the /@makeitem command and create gear that is upgraded for example to +100 / +500/+1000/+5000. that will boost the atatck value of your character, HP and defence. You will then jsut need to find the right upgrade value for it. For example i can do most hard modes with a set of gear at +1000 (they feel like normal modes then)
For dungeons that are <=65 a standard mythic +15 set is enough for practically all of them.
Its easier this way cause you do not need to restart the server each time like you would with editing the xmls. You could also unlock slots in mysthic gear to use dyads for some extra damage / defense.

 

[Dakado]

Thanks! If I want to change Monster HP or Item Damage in server XML files, do I have to change anything on the client side ?


And hopefully my last question Are there any english voice packs available for version 100 ?


Thank you again for the help!

 

[dziobus]

Thanks! If I want to change Monster HP or Item Damage in server XML files, do I have to change anything on the client side ?


And hopefully my last question Are there any english voice packs available for version 100 ?


Thank you again for the help!

You will have to update the coresponding files in the DataCenter file on client side.
You dont need voice voer packs if you use the original gameforge 100.02 client.

 

[S37uP!Update]

Can anyone share the FlyingData xml's? I need them both client side and server side, it seems i forgot to backup them so yeah...stupid move.
Thanks in advance.

 

[Archgeus]

Can anyone share the FlyingData xml's? I need them both client side and server side, it seems i forgot to backup them so yeah...stupid move.
Thanks in advance.

To view the content, you need to sign in or register

 

[Dakado]

Thanks I have setup GF client and it works fine.

You will have to update the coresponding files in the DataCenter file on client side.

And in which files are mob stats in DataCenter file please ?

 

[MasterRow]

Thanks for the info! So there is no way to change the 5-player dungeons to only requiere for example 2 players ? And why is the NpcData outdated ? How it can work then if those mobs do not have defined some stats ?

I would really appareciate if you could point me in the right direction, how to add/modify some gear so I can do solo dungeons ?

Try messing around with DungeonData_[DungeonId].xml, and changing the MaxMemberCount.

 

[E8dsora 8D]

Sí, ese es. Es NAT, por lo que se comunicará con la interfaz virtual VMNet8. Creo que la dirección IP dentro de su máquina virtual es la dirección estática original. ¿Puede verificar dos veces la máquina virtual para asegurarse de que la dirección IP se obtenga automáticamente a través de DHCP?

Configuración -> Red e Internet -> Cambiar opciones de adaptador

Haga clic con el botón derecho en Ethernet0 y seleccione Propiedades, haga clic en Protocolo de Internet versión 4 (TCP/IP4) y haga clic en el botón Propiedades y asegúrese de que ambos estén configurados para obtener automáticamente (ver a continuación)

Si ya es así (se obtiene automáticamente), entonces simplemente puede verificar que tiene conectividad de red desde el interior de la máquina virtual (solo vea si se carga google.com). Si eso funciona, vea si puede hacer ping a 10.10.10.128 desde fuera de la máquina virtual.

Si necesita cambiar la configuración, asegúrese de guardar la configuración y vuelva a ejecutar ipconfig nuevamente dentro de la máquina virtual para ver qué dirección IP se asignó (por si acaso, tal vez reinicie la máquina virtual). Luego cambiará todas las direcciones 192.168.15.7 anteriores a esta. Asegúrese de cerrar todos los procesos en ejecución en el servidor (hay un archivo por lotes en el escritorio que puede ejecutar); deberá cerrar la ventana de comandos de tera-api.

Ya verifiqué que mi máquina virtual obtiene su dirección IP automáticamente a través de DHCP y lo hace.
Tuve que habilitar las opciones automáticamente ya que no estaban habilitadas en mi máquina virtual

. Cuando terminé de configurar la IP, verifiqué si tenía acceso a Internet iniciando sesión en Chrome y sí

, tengo acceso a Internet. Al intentar hacer ping desde fuera de la virtual desde el cmd No pude hacer ping con la máquina virtual que obtuve:

CMD:C:\Users\edson>ping 10.10.10.128
Ping 10.10.10.128 con 32 bytes de datos:Tiempo de espera para esta solicitud.Tiempo de espera para esta solicitud.Tiempo de espera para esta solicitud. Tiempo de espera para esta solicitud.
Estadísticas de ping para 10.10.10.128: Paquetes: enviados = 4, recibidos = 0, perdidos = 4. (100% perdidos)

¿Y ahora qué tengo que hacer?

- - - Actualizado - - -

Sí, ese es. Es NAT, por lo que se comunicará con la interfaz virtual VMNet8. Creo que la dirección IP dentro de su máquina virtual es la dirección estática original. ¿Puede verificar dos veces la máquina virtual para asegurarse de que la dirección IP se obtenga automáticamente a través de DHCP?

Configuración -> Red e Internet -> Cambiar opciones de adaptador

Haga clic con el botón derecho en Ethernet0 y seleccione Propiedades, haga clic en Protocolo de Internet versión 4 (TCP/IP4) y haga clic en el botón Propiedades y asegúrese de que ambos estén configurados para obtener automáticamente (ver a continuación)

Si ya es así (se obtiene automáticamente), entonces simplemente puede verificar que tiene conectividad de red desde el interior de la máquina virtual (solo vea si se carga google.com). Si eso funciona, vea si puede hacer ping a 10.10.10.128 desde fuera de la máquina virtual.

Si necesita cambiar la configuración, asegúrese de guardar la configuración y vuelva a ejecutar ipconfig nuevamente dentro de la máquina virtual para ver qué dirección IP se asignó (por si acaso, tal vez reinicie la máquina virtual). Luego cambiará todas las direcciones 192.168.15.7 anteriores a esta. Asegúrese de cerrar todos los procesos en ejecución en el servidor (hay un archivo por lotes en el escritorio que puede ejecutar); deberá cerrar la ventana de comandos de tera-api.

I already verified that my virtual machine gets its IP address automatically through DHCP and it does.
I had to enable the options automatically as they were not enabled on my virtual machine..

When I finished setting the IP, I checked to see if I had internet access by logging into Chrome and yes, I do have internet access.

When trying to ping from outside the virtual machine from cmd, I was unable to ping the virtual machine. I got:

CMD:

C:\Users\edson>ping 10.10.10.128
Ping 10.10.10.128 with 32 bytes of data: Timeout for this request .Timeout for this request.
Timeout for this request.Timeout for this request.

Ping statistics for 10.10.10.128: Packets: sent = 4, received = 0, lost = 4 (100% lost).

What should I do now?

 

[Archgeus]

Ya verifiqué que mi máquina virtual obtiene su dirección IP automáticamente a través de DHCP y lo hace.
Tuve que habilitar las opciones automáticamente ya que no estaban habilitadas en mi máquina virtual

. Cuando terminé de configurar la IP, verifiqué si tenía acceso a Internet iniciando sesión en Chrome y sí

, tengo acceso a Internet. Al intentar hacer ping desde fuera de la virtual desde el cmd No pude hacer ping con la máquina virtual que obtuve:

CMD:C:\Users\edson>ping 10.10.10.128
Ping 10.10.10.128 con 32 bytes de datos:Tiempo de espera para esta solicitud.Tiempo de espera para esta solicitud.Tiempo de espera para esta solicitud. Tiempo de espera para esta solicitud.
Estadísticas de ping para 10.10.10.128: Paquetes: enviados = 4, recibidos = 0, perdidos = 4. (100% perdidos)

¿Y ahora qué tengo que hacer?

- - - Actualizado - - -



I already verified that my virtual machine gets its IP address automatically through DHCP and it does.
I had to enable the options automatically as they were not enabled on my virtual machine..

When I finished setting the IP, I checked to see if I had internet access by logging into Chrome and yes, I do have internet access.

When trying to ping from outside the virtual machine from cmd, I was unable to ping the virtual machine. I got:

CMD:

C:\Users\edson>ping 10.10.10.128
Ping 10.10.10.128 with 32 bytes of data: Timeout for this request .Timeout for this request.
Timeout for this request.Timeout for this request.

Ping statistics for 10.10.10.128: Packets: sent = 4, received = 0, lost = 4 (100% lost).

What should I do now?

Looks like you speak spanish, Let me help you through discord, PM me

 

[E8dsora 8D]

Parece que hablas español, déjame ayudarte con Discord, envíame un mensaje privado

Hello

Yes I actually speak Spanish and I can't get my TERA game to work or start.

I already sent you a private message so you can help me tomorrow.

Please pass me your Discord ?

 

[Matar]

@E8dsora 8D
Edit your host VMnet network adapters (your game pc ) Host-only VMnet1 or NAT VMnet8 or what you use in VM

 

[E8dsora 8D]

@ E8dsora 8D
Edite sus adaptadores de red host VMnet ( su PC de juego ) Host-only VMnet1 o NAT VMnet8 o lo que use en VM

Is this okay?

 

[Matar]

Is this okay?

if you download the VM server from here no need to change the vm adapter and if you change the network inside vm and copy the ip address its ok

but if you just download the vm and and run it just edit the ip adress of the VMnet 3 or VMnet8 inside your main pc

 

[Archgeus]

OK, i just help E8dsora 8D through discord and now is happily playing with tera

 

[E8dsora 8D]

OK, acabo de ayudar a @ E8dsora 8D a través de discord y ahora está jugando felizmente con tera

thank you very much you are great