Darkeden server files

[xxasifxx]

and me too! lol, just read the guide, if you still dont get it, give up, you just are not capable of doing it.

 

[alemanzuko]

I if I can, add me to msn maybe the two do a server.

jlca_31@hotmail.com

 

[alemanzuko]

I have two problems, please help me!

Images:

Problem1:

Problem2:

 

[GyXeNA]

2ond screen not UPTADE but UPDATE!

 

[GyXeNA]

1st screen u configured the VMware wrong.

Go to VM > Settings...
Click on Ethernet and select NAT on the radio buttons. Click OK.
Now we'll configure the NAT properties.
Go to Edit > Virtual Network Settings...
Select the 'Host Virtual Machine Mapping' tab.
In VMnet8 (default NAT adapter), there is a button labeled '>'.
Click on it and chose Subnet, enter a IP there. It needs to be a different network than your own.
Like, if your ip is 192.168.3.1, it could be 192.168.2.0, but never 192.168.3.0.
I've personally chosen 192.168.5.0, so let's stick with it to the end of this guide.
Leave the hostmask 255.255.255.0, and click OK.
Now go to the NAT tab, select VMnet8 in VMnet host and click edit.
On Gateway IP address enter 192.168.5.150 (subnet is 192.168.5.0 remember?)
Now click on Port Forwarding...
This works like a router, you'll have to put the ports and the host and port is redirects to when connecting.
Click Add...
Here it works like this, on Host Port, you'll put the port the client will connect to the server, on 'Virtual Machine IP Address' you'll put the virtual machine IP and the Port is the virtual machine's port. The IP for the virtual machine we will still configure so just put 192.168.5.10 there, which is the IP we will configure for it.
You have to add these ports, TCP and UDP: 9999, 9998, 9997, 3306.
I think not all these ports are used, but it doesn't hurt to include then, 3306 is mysql port.
After you added those ports, click OK, and OK again in the NAT Settings window.
Now click OK on the settings and after this close vmware, just to make sure it will apply then.
Open VMWare again and go to Virtual Network Settings again.
Go to the DHCP tab, select VMnet8 and click Properties.
Make sure Start IP Address is 192.168.5.150 for this configuration (yes, the same on you put on the nat settings, the gateway ip), the End IP should be 192.168.5.254.
Now press OK and OK again.
Now let's load the Virtual Machine.
Click the 'Play' button on the top and waiting until it loads.
It will ask for a user name, enter 'root' without the quotes and the password is 123456

Let's configure the IP for this Virtual Machine.
Type 'ifconfig eth0 down'
Type 'netconfig'
Select Yes
Press down to set the IP Address, enter 192.168.5.10 (remember the one we entered on port forwarding, that's it)
On netmask leave 255.255.255.0
On Default gateway(IP) enter 192.168.5.150
and 192.168.5.150 too for Primary nameserver
Now press OK

Type '/etc/rc.d/init.d/network restart'
Wait and it should give NO ERRORS(no red thing)

this is from the guide.. follow it and everything should work.

 

[zzfifo]

Please Post new Dark Eden client . Can't download

 

[alemanzuko]

Please help for put online my darkeden please help.!!

added to msn: jlca_31@hotmail.com

Please help!

 

[optimus0]

i have this problem

anyone can helpme please?

thanks

OK SOLVED editing IP in .conf files using putty and not using notepad

 

[optimus0]

now i got this error

i can login in game and play but this error just keep loop

and any translation for mobs names?

thanks


SORRY FOR DOUBLE POST

 

[wesman2232]

now i got this error

i can login in game and play but this error just keep loop

and any translation for mobs names?

thanks


SORRY FOR DOUBLE POST

I don't see a error, did you mess with the WorldID? Other than that it's just connecting. EDIT : Anyone else notice that youtube went down?

 

[optimus0]

ok thanks

but what´s about mobs names? are all in japanise i think

 

[wesman2232]

ok thanks

but what´s about mobs names? are all in japanise i think

use the DarkEden extreme client. most of it is translated.

 

[optimus0]

i am using that the one that is post here v2.34

 

[Marmelaad]

optimus0: In the DB, look for a table caled LastNameInfo, There are the mob names, start changing em and then restart the server.

Edit: Any1 know how to add objects to maps, like stairs and stuff?

 

[n6gesemees]

optimus0: In the DB, look for a table caled LastNameInfo, There are the mob names, start changing em and then restart the server.

Edit: Any1 know how to add objects to maps, like stairs and stuff?

What do you mean objects? If just visual then you need a map editor.

 

[Marmelaad]

how can i change the positioning of the title menu buttons?

 

[songshiyu]

hey guys i nid a gmhandbook for darkeden can anyone sent me a list of commands through my email? thanks and in txt format. shiyu8@gmail.com

 

[shavarmax]

guys somebody know how do it online, it is boring aloun.
i wont to play with my friends,
please help

 

[extacy816]

bloodyshade ! I download your darkeden link and that dk offline server dont works. I downloaded VMware and do what need but then i open darkeden full screen (no updater) then dont go! Why ?

 

[biboman2]

this is the real deal guys, go for it.
I've been using these files for like one week now, they are not really old. De-e like.

I'm posting here the documentation i've created for it so far.
There is some information in the file itself, but it's in chinese and it's rather confusing anyway.

Have fun

--edit:
Forgot to mention, it works with de-e client too. So you can see everything in english xd

:sssssssss