Router Guide

[stargerald]

me too..

 

[stargerald]

Erm my global ip keep changing what can i dO?

 

[eratic]

Anyone who cant use that easy guide shouldnt be making a server let-alone using a computer.. :|

 

[cr0ss]

Adding Accounts

1. In the Enterprise Manager go to Security and then Logins.

2. Right click "sa" and click Properties.

3. Set the password to anything you want (Remember the password though) and change the default Database to MuOnline.

4. Unzip your _mureg.zip file and load mureg.exe

5. Type in your username (sa) and your password (The password you entered just now in the Enterprise Manager).

6. Select the New Account Tab and create a new account.


I Have a problem there.. I cannot change the password.. After i change and go back, it goes back to the old one which i don't know what it is.. What to do?

change to SQL server authentication in the properties window.

 

[cr0ss]

Erm my global ip keep changing what can i dO?

go to no-ip.com or dyndns.com. it realizes the global ip switch.

 

[stargerald]

thanks

 

[stargerald]

My link 1 & 2 not working can anyone help me out?? :eat_arrow

 

[stargerald]

change to SQL server authentication in the properties window.

I still can't change the password. When the start, it is already in the SQL server authentication.

 

[stargerald]

Why after i launch, the main screen, i do not have any server there?!?! Can anyone help me ??

 

[Smo]

I've just finished setting up my server, configuring my router, port forwarding and all that. It works perfectly (using Global IP), however, only I can connect to it. When I booted my server, nobody else could connect, they were told that the server was offline. What's gone wrong?

 

[Kirara]

desperate in need of help

i have done everything u said to do, i have a router and did the steps. but i still get errors at the end of the day. well, the error is that i cant connect into my server, no pop up errors or what-so-ever. i just wanna know, the muserver97 how can i update it to 97b? ( i like mu97b for some reasons ) i have even change my ip in the partition and it still didnt work well... a red bar will appear when i try to connect into the server...can someone pls help? i have been trying for months now

 

[Kirara]

Setting up your router

5. You need to add a loopback device to your computer. Go the your control panel in windows, start the Add new hardware guide and install the microsoft loopback device.. (in the network cards section).

6. Once installation is finished go to control panel and select Networkconnections (Or something similar). Right click your Microsoft Loopback Adapter Connection, and select Properties. Select your Internet-protocol (TCP/IP) and click Properties.

7. Set the IP-Adress to your Global IP.

8. The subnetmask is not the same for everyone. Set it to 255.255.255.254. If you press ok and it gives an error try 255.255.255.253 and if that gives an error try 255.255.255.252 and so on till it doesnt give an error anymore.

-----

i also forgot to mention, i am using a WinXP and i dun have the microsoft loopback device... OR in fact! when i click on add hardware (no add new hardware guide) it will always prompt me to detect software, and wont give me the selection to choose what type to install...some help here?

 

[xapadu]

im is brasilian
help mi
create mi server please
MSN [email protected]
please please please please please please
please please please please please please
please please please please please please
please please please please please please

 

[NARUTO04]

ok i did everything as Boko said but when i open link8* it says dataserver connection failed can someone help me?

 

[Tynakuh]

i got a problem when i restarted my computer after i did everything i had the sql connection thing at the toolbar area but than when i click connect it gives me 2 errors first: "A Specified Server Does not Exist as an Installed Service" than: "An Error 1060 - (A Specified Server Does Not Exist as an Installed Service) occured while performing this Service operation on the MSSQLServer service
if you have a solution please tell me thanks alot

 

[7r3g]

MU 192.168.0.1 TCP 44405 / 44405 always
MU1 192.168.0.1 UDP 55557 / 55557 always
MU2 192.168.0.1 TCP 55970 / 55970 always
MU3 192.168.0.1 TCP 55971 / 55971 always
MU4 192.168.0.1 TCP 55960 / 55960 always
MU5 192.168.0.1 TCP 55961 / 55961 always
MU6 192.168.0.1 TCP 55962 / 55962 always
MU7 192.168.0.1 TCP 55557 / 55557 always
MU8 192.168.0.1 TCP 55901 / 55901 always


this is done right ???:eh:
I mean IP is right ?:eh:

 

[MAYHEM]

I followed this guide but why do clients can't connect?

 

[tmp22]

hmmm.... where can i download the movie for Dark lord?

 

[MAYHEM]

By the way, I use ZXDSL adsl modem. And I can't find any port forwarding feature of my modem. I'm using a DSL connection. Any chance I can make a private server?

 

[ZeRoFrEeZe]

cool

thanks for the guide.. veri useful =).. thanks Boko ^^